Owner's Manual

Page 27

CONSOLE CODES

There are three groups of console codes which are differentiated according to

function. The first group of codes are customization codes and are used to set

defaults such as units, language, heart rate input type, etc. The second group of

codes are machine status codes and are used to track hours and other general

usage patterns for maintenance purposes. The third group of codes are diagnos-

tic codes and are used for troubleshooting. The following key actions are valid in

each group of console codes:

• Pressing [LEVEL ∧], [ 1

# ], [ENTER] displays what group of codes is

being accessed.

• Pressing [SELECT] or [LEVEL ∧] at that point allows you to view all

possible selections. Once in this mode pressing [LEVEL ∨] backs up

through the selections; pressing [ENTER] then selects that item. If

another test level is available at this point, the [SELECT] / [ENTER]

process is repeated.

• Pressing [∧] [1

#, or 2

#], [ENTER ] selects that item directly.

• Pressing [CLEAR] exits any of the special access modes.

Custom Codes

[ ^ ] [ 3 ] [ 0 ] change workout time limit between 5 to 99 minutes

[ ^ ] [ 3] [ 1 ] change units (MPH or KMH)

[ ^ ] [ 3 ] [ 2 ] choose type of heart rate input and priority (telemetry

or contact)

[ ^ ] [ 3 ] [ 3 ] - N/A -

[ ^ ] [ 3 ] [ 4 ] choose console language

[ ^ ] [ 3 ] [ 5 ] change contrast on console

[ ^ ] [ 3 ] [ 6 ] - N/A -

[ ^ ] [ 3 ] [ 7 ] - N/A -

[ ^ ] [ 3 ] [ 8 ]

N/A

[ ^ ] [ 3 ] [ 9 ] reset to factory defaults

1. Change the workout time by pressing [LEVEL: ^], [3 , [0]. The console will

display “MAX TIME.” Press [ENTER]. The console will then display the

current time limit. Use the keypad to enter the desired time, then press

[ENTER]. For no time limit, press [0].

7000 PT CONSOLE