Owner's Manual

Page 32
MAINTENANCE INSTRUCTIONS
INITIAL SERVICE
Upon receiving your machine, use a soft, clean towel to wipe off the dust which
may have accumulated during shipping. Your new machine will require minor
assembly. Refer to the “Installation Instructions” section of this Manual for
details.
PREVENTIVE MAINTENANCE
The procedures for performing the recommended preventive maintenance
are summarized in Table 3. The schedule is based on normal usage in a commer-
cial health club environment; adjust the schedule to meet actual machine usage.
Refer to the “Parts Removal and Replacement” section of this Manual for all
disassembly and assembly instructions.
Cleaning and Inspecting
1. DO NOT USE GLASS CLEANERS OR ANY OTHER HOUSEHOLD CLEANER
ON THE CONSOLE. Clean the console daily with a water-dampened cloth
and wipe dry after cleaning.
2. Clean the exterior of your Stepmill
®
7000 PT exercise system daily with
soap and water.
3. Thoroughly clean the entire machine at least once a week.
4. Inspect the painted surfaces of the exposed frame for any rust, bubbling or
chips during the weekly cleaning. The salt in perspiration can damage the
unpainted surfaces. Repair the damaged area with a rust-inhibitor paint.
Contact our Customer Service Department at 800-331-3578 to order a
touch-up paint kit.
!
WARNING
TO AVOID INJURY DUE TO SLIPPERY PEDAL SURFACES, DO NOT USE
PETROLEUM-BASED CLEANERS OR ARMORALL-TYPE PROTECTANTS
ANYWHERE ON THIS MACHINE OR THE FLOOR MATS.