User Manual AF-150 DMX Fog Machine
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 14.07.
Table of contents Table of contents 1 General information................................................................................................................................. 1.1 Further information........................................................................................................................... 1.2 Notational conventions.................................................................................................................... 1.3 Symbols and signal words.....
AF-150 DMX Fog Machine
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. Instructions The individual steps of an instruction are numbered consecutively. The result of a step is indented and highlighted by an arrow. Example: 1. Switch on the device. 2. Press [Auto]. ð Automatic operation is started. 3. Switch off the device. 1.
General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. WARNING! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in death or serious injury if it is not avoided.
General information Warning signs Type of danger Warning – hot surface. Warning - slip hazard. Warning – harmful or irritating substances. Warning – danger zone.
Safety instructions 2 Safety instructions Intended use This device is intended to be used to produce artificial fog by vaporising fog fluid. Use the device only as described in this user manual. Any other use or use under other operating con‐ ditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions DANGER! Electric shock caused by short-circuit Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a registered electrician. WARNING! Risk of burns from flammable liquids The use of flammable liquids in this device may cause severe burns and damage to property. Always use approved fog fluids. Never fill flammable liquids into the tank of the device.
Safety instructions CAUTION! Possible respiratory problems The device can be operated safely only with the approved fog fluid. The use of other fluids can release toxic gases. Claims for dam‐ ages caused by the use of non-approved fluids shall be excluded. Do not create fog in closed or poorly ventilated areas. Do not expose persons with health problems (such as allergic respiratory conditions, asthma) to artificial fog. NOTICE! Risk of fire Do not block areas of ventilation.
Safety instructions NOTICE! Possible damage due to installation of a wrong fuse The use of different types of fuses can cause serious damage to the unit. Fire hazard! Only fuses of the same type may be used. NOTICE! Possible staining The plasticiser contained in the rubber feet of this product may possibly react with the coating of your surface and after some time cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the surface and use a suitable underlay if neces‐ sary, i.
Features 3 Features This fog machine is suitable for use in clubs, bars, discotheques and on stages.
Installation 4 Installation Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. Place the device on a stable, fire-proof basis that is at least twice as large as the device. The device requires 20 cm clearance at the sides and above.
Starting up 5 Starting up Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards. NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers.
Starting up Connections in DMX mode Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device. Connect the output of the first DMX device to the input of the second one, and so on to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor (110 Ω, ¼ W).
Connections and controls 6 Connections and controls Front panel $ % # ö & 18 AF-150 DMX Fog Machine &
Connections and controls 1 Fog nozzle 2 Fog fluid container with screw-cap 3 Bracket 4 Carrying handle 5 Locking screws for the bracket AF-150 DMX Fog Machine 19
Connections and controls Rear panel % # $ + , ' - 1 2 3 4 5 6 7 8 9 ( 1 2 4 8 16 32 64 128 256 AF-150 Voltage: 230V~50Hz Watt: 800W & ) Fuse: F5AL250V & PUSH ON WIRE CONTROL OFF / PUSH * FUSE POWER 20 AF-150 DMX Fog Machine .
Connections and controls 2 Fog fluid container with screw-cap 3 Bracket 4 Carrying handle 5 Locking screws for the bracket 6 [REMOTE CONTROL] | connection for the receiver of the wireless remote control (optionally available, item no. 464052) 7 [ON] / [OFF] | main switch. Turns the device on and off.
Connections and controls Remote control 4 5 3 1 0 22 AF-150 DMX Fog Machine 2
Connections and controls 15 [TIMER] | press this button to turn the Timer function on or off. In this mode, the via [VOLUME] set fog volume is output in certain intervals; set the interval length via [DURATION]. The corresponding LED lights while the function is enabled. 16 [CONT] | press this button to turn continuous operation on or off. In this mode, the via [VOLUME] set fog volume is output continuously. The corresponding LED lights while the function is enabled.
Operating 7 Operating Filling the unit NOTICE! Possible damages caused by unsuitable fog fluid Fog liquids not approved by the manufacturer may permanently damage the unit. Only use the fog fluids listed on www.thomann.de and follow their instructions for use. First, make sure the unit is disconnected from the mains. Open the screw-cap of the liquid container and fill in the fog fluid. Make sure that no fog fluid is spilled or gets into the device. The easiest way is using a funnel.
Operating Turning the unit on NOTICE! Fire hazard Do not operate the machine unattended. Make sure that the remote control is connected. Connect the device to the mains power grid and turn it on with the main switch. As soon as the required operating temperature is reached, the green LED on the remote lights up. The device is now operational. Operation Operation with an empty fluid container can lead to overheating and permanent damage of the pump.
Operating 7.1 Remote control functions When the device is not controlled by DMX, it supports the following operating modes that can be selected with the remote control: n Manual operation with maximum fog volume To do so, just press [MANUAL]. This mode takes precedence over all others. This means that you don't have to stop the timer function and continuous operation before you press the button.
Operating 7.2 Function in ‘DMX’ mode Setting up the DMX address The value of the DIP switches 1-9 is binary coded. To set the desired DMX address, set the DIP switches so that the sum of the resulting numbers yields the desired DMX address.
Operating DIP switch 10 has no function.
Technical specifications 8 Technical specifications Approved fog fluids Stairville FAST-FOG (item no. 209054) Stairville E-M fluid (item no. 121307) Stairville E fluid (item no. 105454) Stairville E-C fluid (item no. 105455) Stairville E-HD heavy fluid (item no. 105456) Heater power 800 W Warm-up time 4 - 5 min Fluid container capacity 1.2 l Fluid consumption approx. 40 - 50 ml / min Fog burst capacity approx. 110 m3/min Fog burst reach approx.
Technical specifications Output connections DMX control Power consumption 800 W Supply voltage 230 V Fuse 5 mm × 20 mm, 5 A, 250 V, fast-acting Degree of protection IP20 Dimensions (W × H × D) 290 mm × 265 mm × 450 mm Weight 5.
Technical specifications Further information DMX control yes Blast direction Horizontal Timer remote control yes On/Off remote control no Radio remote control no Light effect no With suspension bracket yes AF-150 DMX Fog Machine 31
Plug and connection assignments 9 Plug and connection assignments Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment so that a perfect light experience is guaranteed.
Troubleshooting 10 Troubleshooting In the following we list a few common problems that may occur during operation. We give you some suggestions for easy troubleshooting: Symptom Remedy The unit does not work Check the mains connection and the main fuse. No haze output 1. Check the fluid level in the fog container. 2. Switch the device off and check the hose that leads into the fluid container for flow. No response to the DMX controller 1. Check the address settings and the DMX polarity. 2.
Cleaning 11 Cleaning NOTICE! Possible damages caused by unsuitable cleaning agents Cleaners not approved by the manufacturer may permanently damage the unit. Only use the fog machine cleaners listed on www.thomann.de and follow their instructions for use. Clean the appliance after every 30 operating hours, or if it was not in use for a longer period of time. Procedure 1. Make sure that the device is turned off, disconnected from the mains and completely cooled down. 2.
Cleaning Fan grids The fan grids of the device must be cleaned of any contamination, such as dust, etc. on a reg‐ ular basis. Before cleaning, switch off the device and disconnect mains-operated devices from the mains. Only use pH-neutral, solvent-free and non-abrasive cleaning agents. Clean the unit with a slightly damp lint-free cloth.
Protecting the environment 12 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Notes AF-150 DMX Fog Machine 37
Notes 38 AF-150 DMX Fog Machine
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
