Quick start guide

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de DocID: 464052_15.02.2022
AF-R1 - Wireless Fog Remote
EN
Quick start guide
This quick start guide contains important information on the safe operation of the
product. Read and follow the safety advice and instructions given. Retain the quick
start guide for future reference. If you pass the product on to others please include this
quick start guide.
For the transport and protective packaging, environmentally friendly mate-
rials have been chosen that can be supplied to normal recycling. Ensure that
plastic bags, packaging, etc. are properly disposed of. Do not just dispose of
these materials with your normal household waste, but make sure that they are col-
lected for recycling. Please follow the notes and markings on the packaging.
Batteries must not be disposed of as domestic waste or thrown into re.
Dispose of batteries according to national or local regulations regarding
hazardous waste. To protect the environment, dispose of empty batteries at your re-
tail store or at appropriate collection sites.
This product is subject to the European Waste Electrical and Electronic Equip-
ment Directive (WEEE) in its currently valid version. Do not dispose of your
old device with your normal household waste. Dispose of this product
through an approved waste disposal rm or through your local waste facility.
Comply with the rules and regulations that apply in your country. If in doubt, consult
your local waste disposal facility.
Safety instructions
Intended use
This device is intended to be used for wireless remote control of fog machines. Any
other use or use under other operating conditions is considered to be improper and
may result in personal injury or property damage. No liability will be assumed for
damages resulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are
not within reach of babies and young children. Choking hazard! Ensure
that children do not detach any small parts from the product. They could
swallow the pieces and choke! Never let children unattended use electrical devices.
Notes on wireless transmission
The system works with a frequency of 433.92 MHz and is free of charge and registra-
tion worldwide. This device utilizes frequencies that are not harmonized within the
European Union (EU) and therefore may only be used in certain EU member states.
In all European countries, the frequencies used for the transmission of control signals
for fog machines are strictly regulated. Before you start, make sure the frequencies are
allowed in the respective country and check whether the operation must be reported
to the appropriate authority. For more information, please visit: http://www.thomann.de.
Make sure that transmitter and receiver are both tuned to the same channel. Never set
multiple transmitters to the same channel. Make sure that there are no metal objects bet-
ween the transmitter and receiver. Avoid interference from other radio systems.
Electromagnetic compatibility with other electrical equipment
Using the device near radios or TV sets may cause interference. Then increase the dis-
tance between the devices.
Where to use the product
Never use the product
• in conditions of extreme temperature or humidity
• in extremely dusty or dirty areas
• in locations where the unit can become wet!
General handling
• To prevent damage, never use force when handling the product.
• Never immerse the product in water. Just wipe it with a clean dry or moist cloth. Do
not use liquid cleaners such as benzene, thinners or ammable cleaning agents.
Features
• Wireless remote control for fog machines
• Compatible with the following Stairville devices: AF-300, AF-40 DMX, AF-150 DMX,
AF-250 DMX, AF-180 LED, VF-1200 (Check if your device already has the Wireless
Remote Control port) from year 01/2020
• Also suitable for Fun Generation LED fogger 500 CO2 RGB
• 4 fog machines can be controlled by one remote control
• A battery type 23A 12V is required for operation (not included)
Using the product
1. Connect the receiver to the fog machine to be controlled.
2. Assign an address between 1 and 4 using the DIP switch on the fog machine’s
receiver.
3. Press the corresponding button on the remote control for fog emission.
4. The indicator LED on the receiver indicates the condition of the fog machine:
red = heating up
green = ready for operation
Technical specications
• Frequency of operation: 433.92 MHz
• Transmission power: 6.61 dBm ERP