User manual
Table Of Contents
- Table of Contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 7.1 Switching the device on / off
- 7.2 Operating mode Automatic
- 7.3 Sound control
- 7.4 Operating mode DMX
- 7.5 Operating mode Slave
- 7.6 System settings
- 7.7 Reset to factory default setting
- 7.8 Menu overview
- 7.9 Functions in 2-channel DMX mode
- 7.10 Functions in 5-channel DMX mode
- 7.11 Functions in 8-channel DMX mode
- 7.12 Functions in 10-channel DMX mode
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
8 [DMX OUT]
DMX output, designed as XLR panel socket, 3-pin
9 [POWER OUT]
Lockable output socket (Power Twist) for powering a connected device
Output current 6 A max.
10 [POWER IN]
Lockable input socket (Power Twist) for mains power supply
11 [DMX IN]
DMX input, designed as XLR panel plug, 3-pin
12 Display, function buttons and status LEDs
[MENU]
Activates the main menu and toggles between menu items. Closes an opened submenu.
[UP]
Increases the displayed value by one.
[DOWN]
Decreases the displayed value by one.
[ENTER]
Selects an option of the respective operating mode, conrms the set value.
[DMX]
The LED indicates that a signal is present at the DMX input.
[SOUND]
The LED lights up when the built-in microphone for the sound control detects a signal.
[AUTO]
The LED lights up when an automatic show is running.
[SLAVE]
The LED indicates that the device is in ‘Slave’ mode.
13 [MIC]
Microphone for sound control
14 [MIN/MAX]
Controller for the sensitivity of the built-in microphone
15 Safety key switch for the laser
16 Fuse holder
17 Safety cable eyelet
Connections and controls
All FX Bar
15
LED eect