User manual
Table Of Contents
- Table of Contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 7.1 Switching the device on / off
- 7.2 Operating mode Automatic
- 7.3 Sound control
- 7.4 Operating mode DMX
- 7.5 Operating mode Slave
- 7.6 System settings
- 7.7 Reset to factory default setting
- 7.8 Menu overview
- 7.9 Functions in 2-channel DMX mode
- 7.10 Functions in 5-channel DMX mode
- 7.11 Functions in 8-channel DMX mode
- 7.12 Functions in 10-channel DMX mode
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
7.3 Sound control
1. Press [MENU] repeatedly until the display shows ‘Sou’ and conrm with
[ENTER].
2. Press [UP] or [DOWN] to select between the sound-controlled programmes
‘So01’ … ‘So14’ .
3. Conrm the selection with [ENTER].
4. Use the controller [MIN/MAX] to set the sensitivity of the built-in microphone.
5. To return to the main menu without making changes, press [MENU].
Operating
18
All FX Bar
LED eect