User manual

7.6 System settings
7.6.1 Display illumination
1. Press [MENU] repeatedly until the display shows ‘SYS’ and conrm with
[ENTER].
2. Press [UP] or [DOWN] to select ‘LEdS’ and conrm with [ENTER].
3. Press [UP] or [DOWN] and select between ‘on’ (display lighting is switched o
after 35 seconds) and ‘oFF’ (display lighting is permanently switched on).
4. Conrm the selection with [ENTER].
5. To return to the main menu without making changes, press [MENU].
7.6.2 Display reversal
1. Press [MENU] repeatedly until the display shows ‘SYS’ and conrm with
[ENTER].
2. Press [UP] or [DOWN] to select ‘LEdr’ and conrm with [ENTER].
3. Press [UP] or [DOWN] and select between ‘on’ (display is rotated by 180°) and
‘oFF’ (display is in standard orientation).
4. Conrm the selection with [ENTER].
5. To return to the main menu without making changes, press [MENU].
7.7 Reset to factory default setting
1. Press [MENU] repeatedly until the display shows ‘SYS’ and conrm with
[ENTER].
2. Press [UP] or [DOWN] to select ‘rESt’ and conrm with [ENTER].
3. Press [UP] or [DOWN] and select between ‘no’ (cancel reset) and ‘YES’ (reset to
factory settings).
4. Conrm the selection with [ENTER].
ð
The device is reset to the factory settings without a security query.
5. After the reset, the device restarts and the display shows ‘U100’ .
6. To return to the main menu without making changes, press [MENU].
Operating
20
All FX Bar
LED eect