User manual
Table Of Contents
- Table of Contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 7.1 Switching the device on / off
- 7.2 Operating mode Automatic
- 7.3 Sound control
- 7.4 Operating mode DMX
- 7.5 Operating mode Slave
- 7.6 System settings
- 7.7 Reset to factory default setting
- 7.8 Menu overview
- 7.9 Functions in 2-channel DMX mode
- 7.10 Functions in 5-channel DMX mode
- 7.11 Functions in 8-channel DMX mode
- 7.12 Functions in 10-channel DMX mode
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
Channel Value Function
102…109 AB13 SB13
110…117 AB14 SB14
118…125 AB15 SB15
126…133 AB16 SB16
134…141 AB17 SB17
142…149 AB18 SB18
150…157 AB19 SB19
158…165 AB20 SB20
166…173 AB21 SB21
174…181 AB22 SB22
182…189 AB23 SB23
190…197 AB24 SB24
198…205 AB25 SB25
206…213 AB26 SB26
214…221 AB27 SB27
222…229 AB28 SB28
230…237 AB29 SB29
238…245 AB30 SB30
246…255 ABM (mix programme) SBM (mix programme)
3 0…255 Run speed of the automatic show, from slow to fast, if channel 2 = 6…255
0…255 Strobe eect with increasing speed, if channel 4 = 6…255
Laser
4 If channel 4 = 129…255, channel 3 must be = 1…255
Sound-controlled automatic show for laser, if channel 8 = 72…106, 142…176 or 212…255
0…5 Without function
6…48 Red laser switched on
49…89 Green laser switched on
90…131 Red and green lasers switched on
132…173 Strobe eect red laser, green laser switched on
174…215 Red laser switched on, strobe eect green laser
216…255 Strobe eect red and green lasers
5 0 Without function
Operating
26
All FX Bar
LED eect