User manual
Table Of Contents
- Table of Contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 7.1 Switching the device on / off
- 7.2 Operating mode Automatic
- 7.3 Sound control
- 7.4 Operating mode DMX
- 7.5 Operating mode Slave
- 7.6 System settings
- 7.7 Reset to factory default setting
- 7.8 Menu overview
- 7.9 Functions in 2-channel DMX mode
- 7.10 Functions in 5-channel DMX mode
- 7.11 Functions in 8-channel DMX mode
- 7.12 Functions in 10-channel DMX mode
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
11 Cleaning
Clean the optical lenses, that are accessible from the outside, regularly in order to
optimize the light output. The frequency of cleaning depends on the operating envi‐
ronment: wet, smoky or particularly dirty surroundings can cause more accumulation
of dirt on the optics of the device.
n Clean with a soft cloth using our lamp and lens cleaner (item no. 280122).
n Always dry the parts carefully.
The fan grids of the device must be cleaned of any contamination, such as dust, etc.
on a regular basis. Before cleaning, switch o the device and disconnect mains-oper‐
ated devices from the mains. Only use pH-neutral, solvent-free and non-abrasive
cleaning agents. Clean the unit with a slightly damp lint-free cloth.
Optical lenses
Fan grids
Cleaning
All FX Bar
35
LED eect