User manual

7.3 Using Wireless DMX (W-DMX)

Proceed as follows to establish a connection between transmitter and spotlight:

1. Press [Menu] to activate the main menu. Use [Up] or [Down] to select the menu item

‘Settings’ and conrm with [Enter].

2. Select the menu item ‘W-Dmx’ and conrm with [Enter]. Select ‘On’ to activate W-DMX

mode.

3. Press [Link] or [Pairing] on the wireless solution transmitter.

The connection between the transmitter and the spotlight is being established.

4. If the connection can not be successfully established, check and, if necessary, change the

transmission mode of the wireless solution transmitter (e.g. ‘G3’ / ‘G4S’ / ‘G5’ mode)

and restart to connect.

5. If the spotlight should have been already connected to another transmitter, you have to

interrupt at rst the old connection.

Press [Menu] to activate the main menu. Use [Up] or [Down] to select the menu item

‘Settings’ and conrm with [Enter].

Select the menu item ‘W-Dmx’ and conrm with [Enter]. Select ‘O’ to deactivate W-

DMX mode.

Operating

BEL4 Battery Event Light 4x15W

LED Spotlight