User manual

ð
The LED [W-DMX] turns o.
6. Reactivate the connection between the transmitter and the spotlight as described under
item 2 and 3.
7.4 Resetting the device to factory defaults
1. Turn the device on using the main switch.
2. Simultaneously press and hold [Up] and [Down] for a few seconds.
ð
The display shows ‘RESET’ .
3. Conrm the selection with [Enter].
ð
The device is reset to factory defaults.
Operating
BEL6 Battery Event Light 6x15W
45
LED Spotlight