Quick start guide

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • [e-mail] DocID: 525570_525571_30.11.2021
GP-10 BAT Bk / GP-10 BAT Wh
EN
Quick start guide
This quick start guide contains important information on the safe operation of the
product. Read and follow the safety advice and instructions given. Retain the quick
start guide for future reference. If you pass the product on to others please include
this quick start guide.
Features
• Powerful projector for logos and pictures
• 10-W LED in cold white
• Universally applicable thanks to the integrated battery and the multifunctional
bracket
• Battery life with full power: 6 hours
• Multifunctional holder: strong magnetic base, oor stand and M10 mount
• Easy regulation of brightness using the supplied infrared remote control
• Adjusting size and sharpness of the projection directly on the device
• 10 gobos included in the scope of delivery
Safety instructions
Intended use
This device is intended for projection of exchangeable gobos. The device is designed for professional
use and is not suitable for use in households. Any other use or use under other operating conditions
is considered to be improper and may result in personal injury or property damage. No liability will
be assumed for damages resulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within
reach of babies and young children. Choking hazard! Ensure that children do not de-
tach any small parts from the product. They could swallow the pieces and choke!
Magnetic elds
In the mounting bracket of the device, a strong magnet is installed, which can aect
the operation of electromagnetically inuenceable objects or devices. Do not use the
gobo projector in electromagnetic sensitive environments (pacemakers, credit cards,
etc.).
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that apply in
your country. Always secure the device with a secondary safety attachment, such as a
safety cable or a safety chain.
Eye damage caused by high light intensity
Never look directly into the light source.
External power supply
The device is powered by an external power supply. Before connecting the external power
supply, ensure that the input voltage (AC outlet) matches the voltage rating of the device
and that the AC outlet is protected by a residual current circuit breaker. Failure to do so could
result in damage to the device and possibly the user. Unplug the external power supply before
electrical storms occur and when the device is unused for long periods of time to reduce the
risk of electric shock or re.
Operating life of the LEDs
Extend the operating life of the device by regular breaks and by avoiding frequent switching
on and o. The device is not suitable for continuous operation.
For technological reasons, the light output of LEDs decreases over their lifetime. This eect
increases with higher operating temperature. You can extend the service life of the illuminants
by providing adequate ventilation and operating the LEDs with the lowest possible bright-
ness.
Possible damage to lithium-ion batteries through incorrect storage
By deep discharge, lithium-ion batteries can be permanently damaged or lose some of their
capacity. Before long breaks, charge the batteries to around 50 % of their capacity and then
switch o the device. Store the device at room temperature or cooler in an environment as dry
as possible. If the batteries are stored for a longer period, recharge them to 50 % every three
months. Fully charge the batteries only shortly before use at room temperature.
Incorrect handling of lithium batteries can result in injury
• In the event of a short circuit, overheating or mechanical damage, lithium batteries can cause
severe injuries.
• When handled correctly and appropriately lithium batteries pose no risk.
• Store lithium batteries in a cool, dry place, ideally in the original packaging.
• Store lithium batteries away from heat sources (e.g. radiators or sunlight). Lithium batteries are
hermetically sealed. Never attempt to open a lithium battery.
• If the battery housing is damaged small amounts of the electrolyte may leak out. If this should
happen, seal the lithium battery in airtight packaging and wipe up the traces of electrolyte
using absorbent paper towels. You must wear protective rubber gloves when doing so. Clean
your hands and the aected surface thoroughly with cold water.
• Never attempt to recharge non-rechargeable lithium batteries. When charging lithium batteries
you must use a suitable charging device intended for the purpose.
• Before disposing of the device remove the lithium batteries. Protect used lithium batteries
against potential short circuits, e.g. by covering the poles with adhesive tape.
• Only use powder extinguishers or other suitable extinguishing agents to extinguish a burning
lithium battery.
Where to use the product
Never use the product
• outdoors
• in direct sunlight
• in conditions of extreme temperature or humidity
• in extremely dusty or dirty areas
• at locations where the unit can become wet
General handling
• To prevent damage, never use force when handling the product.
• Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use liquid clea-
ners such as benzene, thinners or ammable cleaning agents.
Connections and operating elements
ö
#
$
%
&
'
(
,
+
)
*
ö Infrared sensor for the signals from the supplied remote control
# Rotary control for adjusting the sharpness of the projection (focus)
$ Rotary control for adjusting the size of the projection (zoom)
% Gobo holder
& Locking screws for the mounting bracket
' Mounting bracket
( Mounting clip, detachable
) Safety cable eyelet
* Main switch. Turns the device on and o.
+ Magnetic base
, Socket for connecting the supplied power adapter
Charging the battery
The device can be operated wirelessly with the integrated lithium-ion battery.
1. Turn the device o with the main switch.
2. Connect the external power adapter to the socket on the rear side.
The indicator light of the power adapter lights up red during the charging process.
When charging is complete, the indicator light of the power adapter lights up
green.
The integrated lithium-ion battery can also be charged during operation.
Battery life
Max. operating time Charging time
100 % power Up to 6 hours
4 hours
75 % power Up to 8 hours
50 % power Up to 13 hours
25 % power Up to 16 hours