User manual

7 Operating

7.1 Starting up the device

Connect the unit to the power grid to start the operation. After a few seconds, the display

shows a running reset. Then the unit is ready for use.

7.2 Main menu

Press [M] to activate the main menu and select an operating mode. Use the arrow buttons to

change the respectively displayed value. When the display shows the desired value press [OK].

If you don't press any button for about 1 minute, the unit returns to the previously selected

mode. The set values are retained even when the device is disconnected from the mains

power supply.

Operating

HL-x180 RGBW, HL-x180 RGB WW, HL-x180 RGBW WH,

HL-x180 RGB WW WH