User manual

Press [M]. Press one of the arrow buttons repeatedly until the display shows ‘SET’ . Press [OK].

Press one of the arrow buttons repeatedly until the display shows ‘SPEE’ . Press [OK]. Now you

can adjust the programme speed for the preprogrammed automatic shows. Use the arrow but‐

tons to select a value between 0 and 255 (display shows ‘T000’ … ‘T255’ ).

The adjustment of the programme speed is only possible when the microphone sensitivity is

set to ‘OFF’ , so the microphone is o.

This setting is only relevant if the device is not controlled via DMX. When the display shows the

desired value press [OK] to conrm the selection and then [M] to return to the parent menu. To

return to the parent menu without making changes, press [M].

Press [M]. Press one of the arrow buttons repeatedly until the display shows ‘SET’ . Press [OK].

Press one of the arrow buttons repeatedly until the display shows ‘DIMM’ . Press [OK]. Now you

can adjust the brightness for the preprogrammed automatic shows. Use the arrow buttons to

select a value between 0 and 255 (display shows ‘D000’ … ‘D255’ ).

This setting is only relevant if the device is not controlled via DMX. When the display shows the

desired value press [OK] to conrm the selection and then [M] to return to the parent menu. To

return to the parent menu without making changes, press [M].

Programme speed

Brightness

Operating

HL-x180 RGBW, HL-x180 RGB WW, HL-x180 RGBW WH,

HL-x180 RGB WW WH