User manual

Press [M]. Press one of the arrow buttons repeatedly until the display shows ‘FADE’ . Press [OK].

Use the arrow buttons to select a value between 1 and 7 (display shows ‘F-01’ … ‘F-07’ ), to acti‐

vate one of the seven Fade programmes.

This setting is only relevant if the device is not controlled via DMX. When the display shows the

desired value press [OK] to conrm the selection and return to the main menu. To return to the

main menu without making changes, press [M].

Press [M]. Press one of the arrow buttons repeatedly until the display shows ‘COLO’ . Press [OK].

Now you can set a basic colour for the preprogrammed automatic shows. Use the arrow but‐

tons to select a value between 1 and 4 (display shows ‘C-01’ … ‘C-04’ ).

This setting is only relevant if the device is not controlled via DMX. When the display shows the

desired value press [OK] to conrm the selection and return to the main menu. To return to the

main menu without making changes, press [M].

Fade programmes

Colour selection

Operating

HL-x180 RGBW, HL-x180 RGB WW, HL-x180 RGBW WH,

HL-x180 RGB WW WH