LED Flood Panel 150 20° LED Flood Panel 150 40° LED floodlight user manual
Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 09.10.
Table of contents Table of contents 1 General information................................................................................................................................. 1.1 Further information........................................................................................................................... 1.2 Notational conventions.................................................................................................................... 1.3 Symbols and signal words.....
Table of contents 9 Plug and connection assignments.................................................................................................. 53 10 Troubleshooting...................................................................................................................................... 54 11 Cleaning.......................................................................................................................................................
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information 1.2 Notational conventions This manual uses the following notational conventions: Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. Displays Texts and values displayed on the device are marked by quotation marks and italics. Examples: ‘24ch’ , ‘OFF’ . 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual.
General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. WARNING! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in death or serious injury if it is not avoided.
General information Warning signs Type of danger Warning – suspended load. Warning – danger zone.
Safety instructions 2 Safety instructions Intended use This device is intended for use as an electronic lighting effect by means of LED technology. The device is designed for professional use and is not suitable for use in households. Use the device only as described in this user manual. Any other use or use under other operating con‐ ditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions Safety DANGER! Danger for children Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and choke! Never let children unattended use electrical devices. DANGER! Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present.
Safety instructions DANGER! Electric shock caused by short-circuit Always use proper ready-made insulated mains cabling (power cord) with a pro‐ tective contact plug. Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a regis‐ tered electrician. WARNING! Eye damage caused by high light intensity Never look directly into the light source.
Safety instructions NOTICE! Risk of fire Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked flames.
Safety instructions NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations. Only operate the device within the ambient conditions specified in the chapter ‘Technical specifications’ of this user manual.
Safety instructions NOTICE! Power supply Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure the user. Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire.
Features 3 Features This LED floodlight is suitable for use in clubs, bars, theatres, exhibitions, etc. Special features of the device: n 150 × 10 mm colour LEDs (RGB) n Control via DMX, via buttons and display on the unit as well as an optionally available IR remote control n 10 preprogrammed automatic shows n Sound control n Master / Slave mode n Compact design For technological reasons, the light output of LEDs decreases over their lifetime. This effect increases with higher operating temperature.
Installation 4 Installation Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. WARNING! Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country.
Installation NOTICE! Risk of overheating The distance between light output and the illuminated surface must be more than 1.5 m (19.7in). Provide sufficient ventilation. The ambient temperature must always be below 40 °C (104 °F). NOTICE! Use of stands When mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand.
Installation NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. Mounting options You can install the unit in hanging or standing position. When in use, the device must always be attached to a solid surface or an approved truss. Use the openings of the bracket provided for mounting.
Installation Please note that this device must not be connected to a dimmer.
Starting up 5 Starting up Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards.
Starting up Connections in DMX mode Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device. Connect the output of the first DMX device to the input of the second one, and so on to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor (110 Ω, ¼ W).
Starting up Connections in master/slave mode When you configure a group of devices in master/slave mode, the first unit will control the other units for an automatic, sound-activated, synchronized show. This function is ideal when you want to start a show immediately. Connect the DMX output of the master device to the DMX input of the first slave device. Then connect the DMX output of the first slave device to the DMX input of the second slave device and so on.
Connections and operating elements 6 Connections and operating elements Front and rear side LED floodlight 24
Connections and operating elements 1 LEDs 2 Bracket adjustment knobs 3 Infrared sensor for the remote control signals 4 Vents 5 Control panel and connections LED Flood Panel 150 20° LED Flood Panel 150 40° 25
Connections and operating elements Control panel and connections LED floodlight 26
Connections and operating elements 6 Display 7 DMX indicator: Flashes when the device is configured for ‘DMX’ mode, but not receiving a DMX signal. If no DMX cable is connected, the DMX indicator lights continuously. 8 [Mode] Activates the main menu for selecting the operating mode. 9 [Setup] Selects an option of the respective operating mode. 10 [Up] Increases the displayed value by one. 11 [Down] Decreases the displayed value by one.
Connections and operating elements 14 [Power Out] IEC chassis socket to power another device with mains voltage. 15 [Power In] IEC chassis plug for the power cable. Below, the range of the allowable operating voltage is specified.
Connections and operating elements Remote control A remote control is optional accessory and not included.
Connections and operating elements 16 [ON/OFF] Button to turn the device on and off. 17 [AUTO] Activates the ‘Automatic‘ mode. 18 [PRG] Activates the operating mode ‘Preprogrammed automatic show’. 19 [SOUND] Activates the sound-control. 20 [SPEED] Adjusts the process speed in ‘Preprogrammed automatic show’ mode. 21 [STROBE] Activates the strobe effect in ‘Preprogrammed automatic show’ mode. 22 [+] Increases the displayed value by one.
Connections and operating elements 23 [Dimming] Enables the manual colour mixture. 24 [–] Decreases the displayed value by one. 25 [0] … [9] Numeric keys. 26 Colour selection with manual colour mixture Use n [R], [G], or [B] for primary colours red, green and blue, n the coloured buttons for directly selecting a mixed colour. n [W] and [A] are without funtion.
Operation 7 Operation 7.1 Operating controls on the device Starting the device Connect the device to the power supply to start operation. After a few seconds, the display indicates that a reset is in progress. The device is then ready for use. Press [Mode]to activate the main menu and select an operating mode. If you do not press any buttons for about ten seconds, the display will be blanked. Press any button to turn the display back on again. The previously called menu is displayed again.
Operation Operating mode ‘Preprog‐ rammed automatic show’ A preprogrammed automatic show can only be activated when the unit is operating in standalone mode or as master in a master / slave combination. This setting takes effect only when the device is not operated under DMX control. Press [Mode] repeatedly until the display shows ‘Pr.xx’ . Press [Setup] and use [Up] and [Down] to select a value between ‘Pr.01’ and ‘Pr.10’ . The following table shows the available pro‐ grammes.
Operation Programme Description ‘Pr.09’ Fading green only ‘Pr.10’ Fading blue only Settings for programme 01: For ‘Pr.01’ , you can choose from 7 predefined colours. After programme selection, press [Setup]. Using [Up] and [Down] , you can now select one of the colour settings ‘1.––r’ to ‘8.00F’ ; see the table below. Value Colour setting ‘1.––r’ Red ‘2.–rg’ Red + green ‘3.––g’ Green ‘4.–gb’ Green + blue ‘5.
Operation Value Colour setting ‘6.–rb’ Red + blue ‘7.rgb’ Red + green + blue ‘8.00F’ No function Press [Setup] again to set the brightness of the colours and the flash frequency for the strobe effect. Depending on the mode, the display shows one of the following values: ‘rxxx’ , ‘gxxx’ , ‘bxxx’ or ‘FSxx’ . Use [Up] and [Down] to select a value between ‘FS00’ (slow) and ‘FS99’ (fast). Settings for programmes 02 to 10: After selecting the colour, press [Setup] to set the program speed.
Operation Operating mode ‘Auto’ Automatic operation can only be activated when the unit is operating in stand alone mode or as master in a master / slave combination. This setting takes effect only when the device is not operated under DMX control. Press [Mode] repeatedly until the display shows ‘Auto’ . All available programmes are played in an endless loop, playback starts automatically. Press [Setup] to set the program speed. The display shows ‘SP.xx’ .
Operation Sound control Sound control can only be activated when the unit is operating in stand alone mode or as master in a master / slave combination. This setting takes effect only when the device is not operated under DMX control. Press [Mode] until the display shows ‘SU.xx’ . This activates the sound controlled automatic show. Press [Setup] and use [Up] and [Down] to define the sensitivity for the sound control in a range in a range from ‘SU.00’ …to ‘SU.31’ .
Operation DMX mode This setting is only relevant if the device is being controlled via DMX. Press [Mode] until the display shows ‘d.xxx’ . Now you can set the number of the first DMX channel used by the device (DMX address). Use [Up] and [Down] to select a value in the range from ‘d.001’ … to ‘d.512’ . Make sure this number matches the configuration of your DMX controller. The following table shows the highest possible DMX address for the different DMX modes.
Operation 7.2 Remote control If the device neither is working as Slave in a Master / Slave configuration nor is not controlled via DMX you can control it using the remote control. Switching on / off Use [ON/OFF] to switch the device on and off. Operating mode ‘Automatic’ Press [AUTO]. The playback of ‘Pr02’ to ‘Pr14’ starts automatically. Operating mode ‘Preprog‐ rammed automatic show’ Press [PRG]. Use [+] and [–] to select a value between ‘Pr.01’ and ‘Pr.14’ .
Operation Sound control Press [SOUND]. This activates a sound controlled automatic show. Use [+] and [–] to adjust the sensitivity of the sound control in a range from ‘SV.00’ to ‘SV.31’ . Dimming Press [Dimming]to adjust the brightness level of the primary colours. Press [R] (red), [G] (green), or [B] (blue) and use [+] and [–] to select a value between 0 and 255. Colour selection Use the coloured buttons to select a colour tone in any mode.
Operation 7.
Operation Channel Value Function 3 0…255 Intensity green (0 %…100 %) 4 0…255 Intensity blue (0 %…100 %) Functions in 8-channel DMX mode In 8-channel mode, multiple devices can be grouped through an identical DMX address. Press [Setup] and assign an ID in the range from ‘Id.01’ to … ‘Id.66’ . You can directly control single or multiple devices through the assigned ID via channel 7.
Operation Channel Value Function 18…26 Red: 255, Green: 150 27…35 Red: 255, Green: 255 36…44 Red: 200, Green 255 45…53 Red: 100, Green: 255 54…62 Red: 40, Green: 255 63…71 Green: 255 72…80 Green: 255, Blue: 50 81…89 Green: 255, Blue: 150 90…98 Green: 255, Blue: 255 99…107 Green: 150, Blue: 255 108…116 Green: 50, Blue: 255 117…125 Blue: 255 126…134 Red: 50, Blue: 255 LED Flood Panel 150 20° LED Flood Panel 150 40° 43
Operation Channel Value Function 135…143 Red: 150, Blue: 255 144…152 Red: 255, Blue: 255 153…161 Red: 220, Blue: 255 162…170 Red: 150, Green: 50, Blue: 100 171…179 Red: 50, Green: 180, Blue: 220 180…188 Red: 50, Green: 220, Blue: 100 189…197 Red: 150, Green: 220 198…206 Red: 150, Blue: 220 207…215 Green: 180, Blue: 220 216…224 Green: 220, Blue: 50 225…233 Red: 220, Green: 100, Blue: 50 234…242 Red: 220, Green: 200, Blue: 100 243…251 Red: 255, Green: 200, Blue: 150 LED floodligh
Operation Channel Value Function 252…255 Red: 255, Green: 255, Blue: 255 If channel 6 = 25…249: Programme progress speed 0…255 Slow…fast If channel 6 = 250…255: Sound control response characteristic 0…255 Slow…fast 3 0…255 Intensity Green (0 %…100 %), if channel 6 = 0 4 0…255 Intensity Blue (0 %…100 %), if channel 6 = 0 5 0…9 No function 10…255 Strobe effect flash frequency, slow…fast 0 RGB mix, constant, colour setting via channel 2…4 1…24 Constant colour, setting via channel 2 25…
Operation Channel 7 Value Function 75…99 Programme Pr04, rapid change seven colours 100…124 Programme Pr05, rapid change three colours 125…149 Programme Pr06, random 1 150…174 Programme Pr07, random 2 175…199 Programme Pr08, fading red only 200…224 Programme Pr09, fading green only 225…249 Programme Pr10, fading blue only 250…255 Sound control You can directly control single or multiple devices of a group via channel 7 by assigning the same ID.
Operation Channel Value Function 40…49 ID4 50…59 ID5 60…69 ID6 70…79 ID7 80…89 ID8 90…99 ID9 100…109 ID10 110…119 ID11 120…129 ID12 130…139 ID13 140…149 ID14 150…159 ID15 160…169 ID16 LED Flood Panel 150 20° LED Flood Panel 150 40° 47
Operation Channel 8 Value Function 170…179 ID17 180…189 ID18 190…199 ID19 200…209 ID20 210 ID21 211 ID22 212 ID23 … … 254 ID65 255 ID66 0…250 No function 251…255 Delayed LED power-up LED floodlight 48
Operation 7.
Technical specifications 8 Technical specifications LED Flood Panel 150 20° LED Flood Panel 150 40° Item no. 235358 Item no.
Technical specifications LED Flood Panel 150 20° LED Flood Panel 150 40° Item no. 235358 Item no. 235359 Power consumption 18 W Supply voltage 100 – 240 V Fuse 5 mm × 20 mm, 1 A, 250 V, slow-blow Degree of protection IP20 Mounting options Hanging, standing Dimensions (W × H × D) 260 mm × 210 mm × 68 mm Weight 1.
Technical specifications Further information LED Flood Panel 150 20° LED Flood Panel 150 40° Item no. 235358 Item no.
Plug and connection assignments 9 Plug and connection assignments Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment so that a perfect light experience is guaranteed.
Troubleshooting 10 Troubleshooting NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. In the following we list a few common problems that may occur during operation.
Troubleshooting Symptom Remedy The unit does not work, no light Check the mains connection and the main fuse. No response to the DMX con‐ troller 1. If the unit is in DMX mode and a DMX controller is connected and turned on, the LED (6) behind the first digit of the display will flash. If it doesn't, no valid DMX signal is received. Check that the DMX controller is switched on. Check the DMX connectors and cables for proper connection. 2.
Troubleshooting Symptom Remedy 2. Move the remote control closer to the unit. 3. Check the remote control battery. If the procedures recommended above do not succeed, please contact our Service Center. You can find the contact information at www.thomann.de.
Cleaning 11 Cleaning Optical lenses Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the light output. The frequency of cleaning depends on the operating environment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device. n Clean with a soft cloth using our lamp and lens cleaner (item no. 280122). n Always dry the parts carefully.
Protecting the environment 12 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
