LED Par 36 COB RGBW 12W, LED Par 46 COB RGBW 20W, LED Par 64 COB RGBW 60W, LED Par 56 COB RGBW 30W LED PAR user manual
Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 27.05.2020, ID: 333906, ...
Table of contents Table of contents 1 General information................................................................................................................................. 1.1 Further information........................................................................................................................... 1.2 Notational conventions.................................................................................................................... 1.3 Symbols and signal words.....
Table of contents 7.6 Functions in 8-channel DMX mode........................................................................................... 36 8 Technical specifications....................................................................................................................... 38 9 Plug and connection assignments.................................................................................................. 47 10 Troubleshooting........................................................
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information 1.2 Notational conventions This manual uses the following notational conventions: Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. Displays Texts and values displayed on the device are marked by quotation marks and italics. Examples: ‘24ch’ , ‘OFF’ . 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual.
General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. WARNING! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in death or serious injury if it is not avoided.
General information Warning signs Type of danger Warning – suspended load. Warning – danger zone.
Safety instructions 2 Safety instructions Intended use This device is intended for use as an electronic lighting effect by means of LED technology. The device is designed for professional use and is not suitable for use in households. Use the device only as described in this user manual. Any other use or use under other operating con‐ ditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions Safety DANGER! Danger for children Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and choke! Never let children unattended use electrical devices. DANGER! Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present.
Safety instructions DANGER! Electric shock caused by short-circuit Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a registered electrician. WARNING! Eye damage caused by high light intensity Never look directly into the light source. WARNING! Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights.
Safety instructions NOTICE! Risk of fire Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked flames.
Safety instructions NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations. Only operate the device within the ambient conditions specified in the chapter ‘Technical specifications’ of this user manual.
Safety instructions NOTICE! Power supply Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure the user. Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire.
Features 3 Features Special features of the device: n n n n n n One four-colour chip on-board LED Stand-alone, master-slave or DMX mode operation Operating via buttons and display on the unit Robust metal housing Universal two-piece mounting bracket for hanging or standing installation Suitable for use in clubs, bars, theatres, exhibitions, etc. or for architectural lighting For technological reasons, the light output of LEDs decreases over their lifetime.
Installation 4 Installation Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. WARNING! Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country.
Installation NOTICE! Risk of overheating The distance between light output and the illuminated surface must be more than 1.5 m (19.7in). Provide sufficient ventilation. The ambient temperature must always be below 40 °C (104 °F). NOTICE! Use of stands When mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand.
Installation NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. Mounting options You can install the unit in hanging or standing position. When in use, the device must always be attached to a solid surface or an approved truss. Use the openings provided on the twopiece bracket for attaching.
Installation Please note that this device must not be connected to a dimmer.
Starting up 5 Starting up Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards.
Starting up Connections in DMX mode Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device. Connect the output of the first DMX device to the input of the second one, and so on to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor (110 Ω, ¼ W).
Starting up Connections in master/slave mode When you configure a group of devices in master/slave mode, the first unit will control the other units for an automatic, sound-activated, synchronized show. This function is ideal when you want to start a show immediately. Connect the DMX output of the master device to the DMX input of the first slave device. Then connect the DMX output of the first slave device to the DMX input of the second slave device and so on.
Connections and operating elements 6 Connections and operating elements Rear panel LED PAR 24
Connections and operating elements 1 Power cord 2 Display 3 [OK] button Confirms a selected value 4, 5 Tasten , Increases or decreases the displayed value by one 6 [M] button Calls up the main menu or a submenu 7 Two-piece bracket for hanging or installation and for securing the safety cable 8 Locking screw for the bracket.
Operating 7 Operating 7.1 Starting up the device Connect the unit to the power grid to start the operation. After a few seconds, the display shows a running reset. Then the unit is ready for use. 7.2 Main menu Press [M] to activate the main menu and to select an operating mode. Use the arrow keys to change the respectively indicated value. When the display shows the desired value, press [OK]. If you don't press any button for about 1 minute, the unit returns to the previous mode.
Operating DMX mode Press [M]. Press one of the arrow keys repeatedly until the display shows ‘SET’ . Press [OK]. Press one of the arrow keys repeatedly until the display shows ‘MODE’ . Press [OK]. Now use the arrow keys to select one of the following DMX operating modes: n n n ‘4CH’ (four channels) ‘6CH’ (six channels) ‘8CH’ (eight channels) This setting is only relevant if the unit is controlled via DMX.
Operating DMX address Press [M]. Press one of the arrow keys repeatedly until the display shows ‘DMX’ . Press [OK]. Now you can set the number of the first DMX channel to be used by the device (DMX address). Select a value between 1 and 512 with the arrow keys (display shows ‘A001’ … ‘A512’ ). When the display shows the desired value, press [OK] to confirm the selection, and then [M] to return to the parent menu. To return to the parent menu without any changes, press [M].
Operating Operating mode ‘Show/Master’ Press [M]. Press one of the arrow keys repeatedly until the display shows ‘LINE’ . Press [OK]. Press one of the arrow keys repeatedly until the display shows ‘MA’ . Press [OK]. Now you can select one of the preprogrammed automatic shows. Use the arrow keys to select a value between 1 and 42 (display shows ‘P-01’ … ‘P-42’ ). The automatic show can only be activated on the unit, that operates as Master.
Operating Programme speed Press [M]. Press one of the arrow keys repeatedly until the display shows ‘SET’ . Press [OK]. Press one of the arrow keys repeatedly until the display shows ‘SPEE’ . Press [OK]. Now you can set the programme speed for the preprogrammed automatic shows. Select a value between 0 and 255 (display shows ‘T000’ … ‘T255’ ). The programme speed can be set only if the microphone sensitivity is set to ‘OFF’ , i.e. the microphone is switched off.
Operating Microphone sensitivity Press [M]. Press one of the arrow keys repeatedly until the display shows ‘SET’ . Press [OK]. Press one of the arrow keys repeatedly until the display shows ‘MIC’ . Press [OK]. Now you can adjust the sensitivity of the built-in microphone for the sound control. Use the arrow keys to select either ‘OFF’ (microphone off) or a value between 1 and 30 (display shows ‘M-01’ … ‘M-30’ ). This setting is only relevant if the unit is not controlled via DMX.
Operating Fade speed Press [M]. Press one of the arrow keys repeatedly until the display shows ‘FADE’ . Press [OK]. Now you can adjust the fade speed of the preprogrammed automatic shows. Select a value between 1 and 7 with the arrow keys (display shows ‘F-01’ … ‘F-07’ ). This setting is only relevant if the unit is not controlled via DMX. When the display shows the desired value, press [OK] to confirm the selection and to return to the main menu. To return to the main menu without any changes, press [M].
Operating 7.
Operating 7.4 Functions in 4-channel DMX mode Channel Value Function 1 0…255 Intensity red (0 % to 100 %) 2 0…255 Intensity green (0 % to 100 %) 3 0…255 Intensity blue (0 % to 100 %) 4 0…255 Intensity white (0 % to 100 %) 7.
Operating Channel Value Function 128…191 Automatic colour change with 12 colours, channels 2 to 5 without function 192…255 Automatic colour change with 4 colours, channels 2 to 5 without function 2 0…255 Intensity red (0 % to 100 %), if channel 1 = 0…63 3 0…255 Intensity green (0 % to 100 %), if channel 1 = 0…63 4 0…255 Intensity blue (0 % to 100 %), if channel 1 = 0…63 5 0…255 Intensity white (0 % to 100 %), if channel 1 = 0…63 6 Effects speed 0…10 No automatic colour change 11…100
Operating 7.
Operating Channel 8 Value Function 0…31 Constant colour, the hue is set by channels 1 to 4 32…63 Fade-out effect, speed controlled by channel 6, channels 1 to 4 define the colour if channel 5 = 0…15 64…95 Fade-in effect, speed controlled by channel 6, channels 1 to 4 define the colour if channel 5 = 0…15 96…127 Fade-in-out effect, speed controlled by channel 6, channels 1 to 4 define the colour if channel 5 = 0…15 128…159 Auto-mix effect, speed controlled by channel 6, channels 1 to 4 without
Technical specifications 8 Technical specifications Item no.
Technical specifications Weight 1.
Technical specifications Item no.
Technical specifications Ambient conditions Temperature range 0 °C…40 °C Relative humidity 50 %, non-condensing LED Par 36 COB RGBW 12W, LED Par 46 COB RGBW 20W, LED Par 64 COB RGBW 60W, LED Par 56 COB RGBW 30W 41
Technical specifications Item no.
Technical specifications Ambient conditions Temperature range 0 °C…40 °C Relative humidity 50 %, non-condensing LED Par 36 COB RGBW 12W, LED Par 46 COB RGBW 20W, LED Par 64 COB RGBW 60W, LED Par 56 COB RGBW 30W 43
Technical specifications Item no.
Technical specifications Ambient conditions Temperature range 0 °C…40 °C Relative humidity 50 %, non-condensing Further information Item no. 333906 Design PAR46 Colour mixture RGB LED type COB Floor housing No Fanless No Remote control Not possible Wireless DMX No Housing colour Black Item no. 375060 Item no. 334993 Item no.
Technical specifications Item no. 334994 Design PAR56 Colour mixture RGB LED type COB Floor housing No Fanless No Remote control Not possible Wireless DMX No Housing colour Black Item no. 375061 Item no. 375066 PAR64 Yes White LED PAR 46 Item no.
Plug and connection assignments 9 Plug and connection assignments Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment so that a perfect light experience is guaranteed.
Troubleshooting 10 Troubleshooting NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. In the following we list a few common problems that may occur during operation.
Troubleshooting Symptom Remedy The unit does not work, no light. Check the mains connection and the fuse. No response to the DMX con‐ troller. 1. Check the DMX ports and cables for proper connection. 2. Check the address settings and the DMX polarity. 3. Try using another DMX controller. 4. Check to see if the DMX cables run near or alongside to high voltage cables that may cause damage or interfer‐ ence to DMX interface circuits.
Cleaning 11 Cleaning Optical lenses Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the light output. The frequency of cleaning depends on the operating environment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device. n Clean with a soft cloth using our lamp and lens cleaner (item no. 280122). n Always dry the parts carefully.
Protecting the environment 12 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Notes LED PAR 52
Notes LED Par 36 COB RGBW 12W, LED Par 46 COB RGBW 20W, LED Par 64 COB RGBW 60W, LED Par 56 COB RGBW 30W 53
Notes LED PAR 54
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
