Manual

ManualsBrandsStairville ManualsLED Lighting SetsThon Case 4x LED PAR 56 Short

Owner‘s manual

LED PAR SPOT

PAR 56/64 10 MM BLACK/SILVER FLOOR RGB

Summary of content (8 pages)

PAGE 1
PAR 56/64 10 MM BLACK/SILVER FLOOR RGB Owner‘s manual LED PAR SPOT
PAGE 2
Thank you for choosing one of our LED PAR spot lights. Please read this user manual carefully and follow the instructions to avoid danger or damage to the unit due to mishandling. Keep this user guide for future reference. If you give the unit to another user, be sure that he also receives this instruction booklet. Safety instructions You have to carefully read the instruction, which includes important information about the installation, usage and maintenance, BEFORE operating this device.
PAGE 3
power socket is assured, thus in an emergency situation you are able to immediately pull out the mains adaptor. To eliminate the risk of fire you must completely disconnect the mains adaptor from the power socket after the device has been used. XXAlways grasp the mains adaptor by the plug. Do not pull on the adaptor cord and never touch the mains adaptor with wet hands as this could result in a short circuit or an electrical shock.
PAGE 4
XXIn the event of serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance centre. Always use the same type spare parts. XXNever leave this device running unattended. XXNever look directly into the light source (sensitive persons may suffer an epileptic shock). Sound action mode Set dip switch 12 to ON.
PAGE 5
Manual mode Set dip switches 10, 11 and 12 to ON. The unit is in manual mode then. In this mode you can set the colour brightness according to the following table: RED DIP 1, 2 GREEN DIP 3, 4 BLUE DIP 5, 6 BRIGHTNESS OFF/OFF OFF/ON ON/OFF ON/ON 0 25% 50% 100% DMX mode Set dip switches 10, 11 and 12 to OFF. The unit is in DMX mode then and may be controlled by any DMX controller. The DMX channels may be set in a range of 1 - 507 by dip switches 1 to 9.
PAGE 6
Channel usage is set up according to the following table: CH-1 RED 0 = OFF CH-2 GREEN 0 = OFF CH-3 BLUE 0 = OFF CH-4 MACRO 1-255 = DIM 1-255 = DIM 1-255 = DIM 6 0-15 = OFF 16-255 = ON 0-15 = OFF 16-255 = ON 0-15 = OFF 16-255 = ON 0-15 = OFF 16-255 = ON 0-15 = OFF 16-255 = ON 0-15 = OFF 16-255 = ON 0-15 = OFF 16-255 = ON 0-15 = OFF 16-255 = ON 0-15 = OFF 16-255 = ON n/a n/a n/a CH-5 Speed/Strobe 0 = OFF 16-255 = strobe 16 steps of speed CH-6 MODE CH-7 Master DIM 0-31 = colour setting 32-63 =
PAGE 7
Fixture cleaning The cleaning of the fixtures must be carried out periodically to optimise light output. Cleaning frequency depends on the environment in which the fixture operates: a damp, smoky or particularly dirty surrounding can increase the accumulation of dirt. XXClean with soft cloth using normal glass cleaning fluid. XXAlways dry the parts carefully. XXClean the fixture at least every 20 days. Disposal Do not dispose of the device at the end of his operating life in your normal domestic waste.