Data Sheet

Thomann GmbH

Hans-Thomann-Straße 1 • 96138 Burgebrach

Germany • www.thomann.de

DocID: 470701_08.08.2019

9 Diusion lter 25°

9 Fits Stairville xBrick Full-Colour

16×3W RGB #259187

9 Metal bracket is screwed to the

front of the housing

9 Including two non-losable screws

Assembly Instructions

1. Disconnect the device from the power supply.

2. Unscrew the two Phillips screws from the device.

3. Align the diusion lter with the threaded holes

above the unit.

4. Screw the diusion lter to the device with the two

hand screws.

Lens Kit xBrick 1 25°

This device is intended to be used as a 25° diusion lter for suitable Stairville

xBrick devices. Any other use or use under other operating conditions is consid-

ered to be improper and may result in personal injury or property damage. No

liability will be assumed for damages resulting from improper use.

Ensure that plastic bags, packaging, etc. are properly disposed of and

are not in the reach of babies and young children. Choking hazard! En-

sure that children do not detach any small parts (e.g. knobs or the like)

from the product. They could swallow the pieces and choke! Never let children

use electrical devices unattended.

For the transport and protective packaging, environmentally friendly

materials have been chosen that can be supplied to normal recycling.

Ensure that plastic bags, packaging, etc. are properly disposed of. Do

not just dispose of these materials with your normal household waste, but make

sure that they are collected for recycling. Please follow the notes and markings

on the packaging.

Thumbscrew Thumbscrew

Phillips screw