T-Bar 120 truss beam user manual
Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 08.04.
Table of contents Table of contents 1 General information................................................................................................................................. 4 1.1 Further information........................................................................................................................... 5 1.2 Symbols and signal words............................................................................................................... 6 2 Safety instructions.......
General information 1 General information This manual contains important instructions for the safe operation of the product. Read and follow the safety instructions and all other instructions. Keep the manual for future reference. Make sure that it is available to all those using the product. If you sell the unit, please make sure that the buyer also receives this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information 1.2 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual. Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. CAUTION! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in minor injury if it is not avoided.
Safety instructions 2 Safety instructions Intended use This truss beam is used for stable mounting of headlights to light tripods. Use the product only as described in this user manual. Any other use or use under other operating conditions is con‐ sidered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions Safety DANGER! Danger for children Ensure that plastic bags, packaging, etc. are properly disposed of and are not in the reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the product. They could swallow the pieces and choke! Never let children play unattended with the product.
Safety instructions Comply with regulations When installing and operating, make sure to follow the standards and regulations that apply in your country.
Features 3 Features Special characteristics: n n n n n Sturdy metal construction TV spigot (28 mm adapter) included Up to six spotlights mountable Maximum weight-bearing capacity: 45 kg Width: 1.
Operating 4 Operating Unpack and check carefully there is no transportation damage before using the product. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
Operating Comply with regulations When installing and operating, make sure to follow the standards and regulations that apply in your country.
Operating Setup Attach the TV spigot (28 mm adapter) to the tripod and tighten it with the locking screw on the mounting. Put on the crossbar and fix the crossbar in the desired position with the wing nut. Affix up to six spotlights to the truss beam. Spread the spotlights evenly on the truss beam. Observe the instructions of the respective manufacturers. The maximum load capacity of 45 kg in total must not be exceeded.
Operating Dismounting Remove the spotlights. When dismounting, take care for balanced load, too. Loosen the locking screw on the crossbar mounting and detach the crossbar . Pack all parts of the system in their original package, as possible, and store the package in a dry place protected against moisture.
Technical specifications 5 Technical specifications Length 120 cm Mounting slots 6 mounting options for spotlights Holder type 1 × adapter (TV spigot), 28 mm 6 × mounting hole with screws Load, max. (with centric load) 45 kg Dimensions (W × H × D) 120 cm × 2 cm × 4 cm Weight 3.
Protecting the environment 6 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Notes T-Bar 120 17
Notes truss beam 18
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
