User Manual TinyBright IP Q15 LED Floodlight
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 02.06.
Table of contents Table of contents 1 General information................................................................................................................................. 1.1 Further information........................................................................................................................... 1.2 Notational conventions.................................................................................................................... 1.3 Symbols and signal words.....
TinyBright IP Q15 LED Floodlight
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual. Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided.
General information Warning signs Type of danger Warning – high-voltage. Warning – dangerous optical radiation. Warning – suspended load. Warning – danger zone.
Safety instructions 2 Safety instructions Intended use This device is intended for use as an electronic lighting effect by means of LED technology. The device is designed for professional use only and is not suitable for use in households. Use the device only as described in this user manual. Any other use or use under other operating con‐ ditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions DANGER! Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device if covers, protectors or optical components are missing or damaged. DANGER! Electric shock caused by short-circuit Do not modify the mains cable or the plug. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a registered electrician.
Safety instructions NOTICE! Risk of fire due to incorrect polarity Incorrectly inserted batteries may destroy the device or the batteries. Ensure that proper polarity is observed when inserting bat‐ teries. NOTICE! Possible damage by leaking batteries Leaking batteries can cause permanent damage to the device. Take batteries out of the device if it is not going to be used for a longer period.
Features 3 Features The LED floodlight is particularly suitable for decorative lighting outdoors. The device is characterized by: n n n n n n n Control via infrared remote control (included) Choice of 46 colours Built-in automatic show programmes Outdoor use due to protection class IP65 Removable ground spike Pressure compensation valve for a long service life Robust and elegant housing made of aluminium For technological reasons, the light output of LEDs decreases over their lifetime.
Features The specified protection class does not make a statement about the weather resistance of the equipment (resistance to changing ambient conditions as well as against the effects of sun‐ light and UV rays). The seals and screw connections of the equipment must be checked regularly to ensure a fault-free operation. In cases of doubt, consult a specialist workshop in due time.
Installation and starting up 4 Installation and starting up Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
Installation and starting up NOTICE! Risk of overheating Always ensure sufficient ventilation. The ambient temperature must not exceed the limits stated in the chapter Tech‐ nical Specifications of the User Manual. Mounting options You can install the unit in hanging or standing position. When in use, the device must always be attached to a solid surface or an approved truss. Use the openings of the bracket provided for mounting.
Installation and starting up Connecting the DMX IP65 con‐ nectors ö # $ Proceed as follows to connect the DMX-IP65 connectors: Infrared sensor for the remote control 1. Insert the plug completely and straight into the coupling. 2. Make sure that the flexible sealing ring has complete contact. 3. Turn the union nut straight onto the thread of the coupling. Hand-tighten the union nut. Make sure that there is no objects between the the two IR sensors which may cause interfer‐ ence problems .
Installation and starting up Inserting the battery into the remote control Press the lock of the battery holder to the centre of the housing and pull out the battery holder like a drawer. Insert the battery. The battery is correct if the positive pole points to the housing base of the remote control. Slide the battery holder back into the remote until it clicks into place. When shipping, the battery is already installed in the remote and protected against discharge by a transparent plastic foil.
Components and functions 5 Components and functions & # TinyBright IP Q15 $ ö % 18 TinyBright IP Q15 LED Floodlight '
Components and functions 1 Bracket for floor placement or hanging 2 Locking screw for the bracket.
Components and functions Remote control ( ) DIMMER + * PROGRAM 7 /[DIMMER] Press this button to turn the device on. COLOR SPEED With the device switched on, press the button to activate the dimming function. Use [–] or [+] to adjust the brightness. Press the button twice in succession to switch off the device. , - 8 [COLOR] Press the button to activate the colour selection. Use [–] or [+] to set one of the 46 col‐ ours. 9 [PROGRAM] IRC - 1 Press the button to activate the programme mode.
Technical specifications Technical specifications 144 mm 353 mm 122 mm 136 mm 80 mm 6 Light source 4-in-1 RGBW LED, 15 W Optical properties Beam angle Control Infrared remote control Power consumption 15 W Supply voltage 100 - 240 V Battery (remote control) Lithium button cell, CR 2025, 3 V Degree of protection IP65 Mounting options hanging, standing, ground spike Dimensions (W × H × D) w/ bracket, w/o ground spike 122 mm × 144 mm × 136 mm 25° 50/60 Hz w/ bracket, w/ ground spike:
Technical specifications Further information 22 TinyBright IP Q15 LED Floodlight Outdoor housing shape Garden LED type x-in-1 Base housing yes Fanless yes Remote control included wireless DMX No Housing colour Black
Cleaning 7 Cleaning Optical lenses Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the light output. The frequency of cleaning depends on the operating environment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device. n Clean with a soft cloth using our lamp and lens cleaner (item no. 280122). n Always dry the parts carefully.
Protecting the environment 8 Protecting the environment Disposal of the packaging mate‐ rial For the packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Protecting the environment Disposal of your old device This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose with your normal household waste. Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.
Notes 26 TinyBright IP Q15 LED Floodlight
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
