Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX LED spotlight user manual
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 24.01.
Table of contents Table of contents 1 General information................................................................................................................................. 1.1 Further information........................................................................................................................... 1.2 Notational conventions.................................................................................................................... 1.3 Symbols and signal words.....
Table of contents 7.6 7.7 7.8 7.9 7.10 7.11 7.12 7.13 7.14 7.15 Functions in DMX mode 2Ch1 (model version with RGB LEDs)...................................... Functions in DMX mode 2Ch2..................................................................................................... Functions in DMX mode 3Ch1 .................................................................................................... Functions in DMX mode 3Ch2 (model version with RGB LEDs)......................................
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information 1.2 Notational conventions This manual uses the following notational conventions: Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. Displays Texts and values displayed on the device are marked by quotation marks and italics. Examples: ‘24ch’ , ‘OFF’ . Cross-references References to other locations in this manual are identified by an arrow and the specified page number.
General information 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual. Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. WARNING! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in death or serious injury if it is not avoided.
General information Warning signs Type of danger Warning – high-voltage. Warning – dangerous optical radiation. Warning – suspended load. Warning – danger zone.
Safety instructions 2 Safety instructions Intended use This device is intended for use as an electronic lighting effect by means of LED technology. The device is designed for professional use only and is not suitable for use in households. Use the device only as described in this user manual. Any other use or use under other operating con‐ ditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions Safety DANGER! Danger for children Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and choke! Never let children unattended use electrical devices. DANGER! Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present.
Safety instructions WARNING! Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights. NOTICE! Risk of fire Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked flames. NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture.
Safety instructions NOTICE! Possible damage due to installation of a wrong fuse The use of different types of fuses can cause serious damage to the unit. Fire hazard! Only fuses of the same type may be used. NOTICE! Possible staining The plasticiser contained in the rubber feet of this product may possibly react with the coating of your surface and after some time cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the surface and use a suitable underlay if neces‐ sary, i.
Features 3 Features The LED spotlight is particularly suitable for lighting applications in clubs, night clubs, on rock stages, in theatres and musicals. It can also be used for effect lighting of stage backgrounds and as blinder. Special features of the device: n Equipped with SMD LEDs with 0.2 W power consumption each, depending on the model version: – Stairville Wild Wash Pro 648 LED RGB DMX (item no. 432585): 648 tricolour LEDs (RGB) – Stairville Wild Wash Pro 648 LED White DMX (item no.
Features For technological reasons, the light output of LEDs decreases over their lifetime. This effect increases with higher operating temperature. You can extend the service life of the illuminants by providing adequate ventilation and operating the LEDs with the lowest possible brightness.
Installation 4 Installation Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. You can install the device standing or hanging. When in use, the device must be mounted at a solid surface or clamped to an approved truss.
Installation NOTICE! Risk of overheating The distance between light output and the illuminated surface must be more than 1.5 m (19.7in). Provide sufficient ventilation. The ambient temperature must always be below 40 °C (104 °F). NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers.
Installation Please note that this device must not be connected to a dimmer.
Starting up 5 Starting up Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards.
Starting up Connections in DMX mode Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device. Connect the output of the first DMX device to the input of the second one, and so on to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor (110 Ω, ¼ W).
Starting up Connections in master/slave mode When you configure a group of devices in master/slave mode, the first unit will control the other units for an automatic, sound-activated, synchronized show. This function is ideal when you want to start a show immediately. Connect the DMX output of the master device to the DMX input of the first slave device. Then connect the DMX output of the first slave device to the DMX input of the second slave device and so on.
Connections and controls 6 Connections and controls ' 5 ( PUSH Wild Wash Pro 648 LED PUSH # $ ( 4 ö ) % & LED spotlight 22
Connections and controls 1 Display and control buttons [MENU] Activates the main menu and toggles between menu items. [UP] Increases the displayed value by one. [DOWN] Decreases the displayed value by one. [ENTER] Selects an option of the respective operating mode.
Connections and controls 3 [MIC] Microphone for sound control 4 [POWER IN] Lockable input socket (Power Twist) for powering the device [POWER OUT] Lockable output socket (Power Twist) for powering a connected device (maximum output current 16 A) 5 Safety cable eyelet.
Operating 7 Operating 7.1 Starting the device Connect the device to the power supply to start operation. After a few seconds, the display indicates that a reset is in progress. The device is then ready for use. The display shows the operating mode that was selected when the unit was last powered off.
Operating 7.2 Main menu Operating mode ‘DMX’ This setting is only relevant if the device is controlled via a DMX controller. Press [MODE] repeatedly until one of the available DMX modes appears in the display and press [ENTER]. Use [UP] and [DOWN] to select the desired DMX mode and press [ENTER]. The following table shows the DMX modes available depending on the version. Model version Available DMX modes Stairville Wild Wash Pro 648 LED RGB DMX (item no.
Operating DMX address This setting is only relevant if the device is controlled via a DMX controller. Press [MODE] repeatedly until the currently set DMX address appears in the display ( ‘Axxx’ ) and press [ENTER]. Use [UP] and [DOWN] to select the desired DMX address between 1 ( ‘A001’ ) and 512 ( ‘A512’ ) and press [ENTER].
Operating Operating mode ‘Manual con‐ trol’ (RGB LED model version) This setting is only relevant if the device is not controlled via a DMX controller and not working as slave in a master / slave configuration. In this mode, the intensity of the LEDs can be adjusted per colour and a Strobe effect can be engaged. Press [MODE] repeatedly until ‘C1xx’ appears in the display and press [ENTER].
Operating Operating mode ‘Colour mac‐ ros’ (RGB LED model version) This setting is only relevant if the device is not controlled via a DMX controller and not working as slave in a master / slave configuration. In this mode, one of the three primary colours or a predefined mixed colour can be selected. Press [MODE] repeatedly until ‘CMxx’ appears in the display and press [ENTER]. Use [UP] and [DOWN] to select a value between ‘CM01’ and ‘CM015’ and press [ENTER]. The table below shows the colour assignment.
Operating Setting Colour CM08 Blue CM09 Lavender CM10 Mauve CM11 Magenta CM12 Pink CM13 Warm white CM14 White CM15 Cold white LED spotlight 30
Operating Operating mode ‘Automatic colour change’ (RGB LED model version) This setting is only relevant if the device is not controlled via a DMX controller and not working as slave in a master / slave configuration. In this mode, the colours are changed at freely select‐ able speed, a Strobe effect can be engaged. Press [MODE] repeatedly until ‘JUxx’ appears in the display and press [ENTER].
Operating Operating mode ‘Fading’ (white LED model version) This setting is only relevant if the device is not controlled via a DMX controller and not working as slave in a master / slave configuration. In this mode, the LEDs will gradually fade in with a freely selectable speed from blackout to maximum brightness and reverse, a Strobe effect can be engaged. Press [MODE] repeatedly until ‘FA00’ appears in the display and press [ENTER].
Operating Operating mode ‘Fading’ (RGB LED model version) This setting is only relevant if the device is not controlled via a DMX controller and not working as slave in a master / slave configuration. In this mode, the LEDs gradually change between the available colours at freely selectable speed, a Strobe effect can be engaged. Press [MODE] repeatedly until ‘FA00’ appears in the display and press [ENTER].
Operating Operating mode ‘Automatic show’ (RGB LED model version) This setting is only relevant if the device is not controlled via a DMX controller and not working as slave in a master / slave configuration. In this mode, the LEDs gradually change at freely selectable speed between the available colours, the Strobe effect is automatically engaged in regular intervals. Press [MODE] repeatedly until ‘AUTO’ appears in the display and press [ENTER].
Operating Operating mode ‘Slave’ This setting is only relevant if the device is not controlled via a DMX controller and working as slave in a master / slave configuration. Master and slave devices are connected to each other via a DMX cable, the master device is in one of the operating modes ‘Manual control’, ‘Fading’, ‘Automatic show’ or ‘Sound control’. Press [MODE] repeatedly until ‘SLAV’ appears in the display and press [ENTER]. The slave device now copies exactly the actions of the master device.
Operating 7.
Operating 7.4 Functions in DMX mode 1ch Channel Value 1 Strobe Function 0 … 10 LEDs off (blackout) 11 … 255 Strobe effect, speed increasing from approx.
Operating 7.5 Functions in DMX mode 2Ch (model version with white LEDs) Channel Value Function 1 0 … 255 Dimmer (0 % to 100 %) 2 Strobe 0…5 LEDs on 6 … 10 LEDs off (blackout) 11 … 250 Strobe effect, speed increasing from approx.
Operating 7.
Operating Channel Value Function 70 … 77 Lavender 78 … 85 Mauve 86 … 93 Magenta 94 … 101 Pink 102 … 109 Warm white 110 … 117 White 118 … 125 Cold white 126 … 128 Ending colour change 129 … 192 Colour change, increasing speed 193 … 255 Gradual colour change, increasing speed LED spotlight 40
Operating 7.7 Functions in DMX mode 2Ch2 Channel Value Function 1 0 … 255 Dimmer (0 % to 100 %) 2 Strobe 0…5 LEDs on 6 … 10 LEDs off (blackout) 11 … 250 Strobe effect, speed increasing from approx.
Operating 7.8 Functions in DMX mode 3Ch1 Channel Value Function 1 0 … 255 Dimmer (0 % to 100 %) 2 Strobe 3 0…5 LEDs on 6 … 10 LEDs off (blackout) 11 … 250 Strobe effect, speed increasing from approx.
Operating 7.9 Functions in DMX mode 3Ch2 (model version with RGB LEDs) Channel Value Function 1 0 … 255 Dimmer (0 % to 100 %) 2 Strobe 3 0…5 LEDs on 6 … 10 LEDs off (blackout) 11 … 250 Strobe effect, speed increasing from approx.
Operating Channel Value Function 30 … 37 Yellow 38 … 45 Green 46 … 53 Turquoise 54 … 61 Cyan 62 … 69 Blue 70 … 77 Lavender 78 … 85 Mauve 86 … 93 Magenta 94 … 101 Pink 102 … 109 Warm white 110 … 117 White 118 … 125 Cold white 126 … 128 Ending colour change LED spotlight 44
Operating Channel Value Function 129 … 192 Colour change, increasing speed 193 … 255 Gradual colour change, increasing speed Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX 45
Operating 7.
Operating Channel Value 3 Sound control 7.
Operating 7.
Operating Channel Value 3 Colour macro Function 0…5 LEDs off (blackout) 6 … 13 Red 14 … 21 Amber 22 … 29 Warm yellow 30 … 37 Yellow 38 … 45 Green 46 … 53 Turquoise 54 … 61 Cyan 62 … 69 Blue 70 … 77 Lavender 78 … 85 Mauve 86 … 93 Magenta Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX 49
Operating Channel 4 Value Function 94 … 101 Pink 102 … 109 Warm white 110 … 117 White 118 … 125 Cold white 126 … 128 Ending colour change 129 … 192 Colour change, increasing speed 193 … 255 Gradual colour change, increasing speed Sound control 0…5 Sound control off 6 … 255 Sound control on, increasing sensitivity LED spotlight 50
Operating 7.
Operating Channel Value 3 Strobe programmes 4 0…5 No function 11 … 255 Automatic Strobe programmes with alternating segments Running speed 11 … 255 5 Function Automatic Strobe programme speed, increasing if channel 5 = 0…5) Sound control 0…5 Sound control off 6 … 255 Sound control on, increasing sensitivity LED spotlight 52
Operating 7.
Operating Channel Value Function 3 0 … 255 Intensity red (0 % to 100 %) 4 0 … 255 Intensity green (0 % to 100 %) 5 0 … 255 Intensity blue (0 % to 100 %) 6 Sound control 0…5 Sound control off 6 … 255 Sound control on, increasing sensitivity LED spotlight 54
Operating 7.15 Functions in DMX mode 7Ch (model version with 648 white LEDs) Channel Value Function 1 0 … 255 Dimmer (0 % to 100 %) 2 Strobe 3 0…5 LEDs on 6 … 10 LEDs off (blackout) 11 … 250 Strobe effect, speed increasing from approx.
Operating Channel Value Function 6 0 … 255 Brightness of LED segment 3 (0 % to 100 %) 7 0 … 255 Brightness of LED segment 4 (0 % to 100 %) LED spotlight 56
Technical specifications 8 Technical specifications 255 mm Stairville Wild Wash Pro 648 LED RGB DMX (item no. 432585) 95 m m 385 mm Light source 648 × tricolour SMD LEDs, 0.2 W each Optical properties Beam angle Control DMX, buttons and display on the unit Number of DMX channels 1, 2, 3, 4 or 6 Input connections Voltage supply Lockable input socket (Power Twist) DMX control XLR chassis plug, 3-pin approx.
Technical specifications DMX control XLR chassis socket, 3-pin XLR chassis socket, 5-pin Power consumption 130 W Operating supply voltage 100 - 240 V Fuse 5 mm × 20 mm, 2 A, 250 V, fast-acting Protection class IP20 Mounting options hanging, standing Dimensions (W × H × D) 385 mm× 255 mm× 95 mm Weight 3.
Technical specifications Further information Outdoor capable No Colour mixture RGB LED type SMD Floor housing No Fanless No Remote control Not possible wireless DMX No Housing colour black Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX 59
Technical specifications 255 mm Stairville Wild Wash 648 LED White DMX (item no. 432586) 95 m m 385 mm Light source 648 × SMD LEDs, cold white, 0.2 W each Light source properties Colour temperature 6000 K Colour rendering index CRI 75 Optical properties Beam angle approx.
Technical specifications DMX control XLR chassis socket, 3-pin XLR chassis socket, 5-pin Power consumption 130 W Operating supply voltage 100 - 240 V Fuse 5 mm × 20 mm, 2 A, 250 V, fast-acting Protection class IP20 Mounting options hanging, standing Dimensions (W × H × D) 385 mm× 255 mm× 95 mm Weight 3.
Technical specifications Further information Outdoor capable No Colour mixture Cold white LED type SMD Floor housing No Fanless No Remote control Not possible wireless DMX No Housing colour black LED spotlight 62
Technical specifications 255 mm Stairville Wild Wash 648 WW DMX (item no. 481229) 95 m m 385 mm Light source 648 × SMD LEDs, warm white, 0.2 W each Light source properties Colour temperature 2900 K Colour rendering index CRI Ra >90 Optical properties Beam angle approx.
Technical specifications DMX control XLR chassis socket, 3-pin XLR chassis socket, 5-pin Power consumption 130 W Operating supply voltage 100 - 240 V Fuse 5 mm × 20 mm, 2 A, 250 V, fast-acting Protection class IP20 Mounting options hanging, standing Dimensions (W × H × D) 385 mm× 255 mm× 95 mm Weight 3.
Technical specifications Further information Outdoor capable No Colour mixture Warm white LED type SMD Floor housing No Fanless No Remote control Not possible wireless DMX No Housing colour black Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX 65
Plug and connection assignment 9 Plug and connection assignment Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment so that a perfect light experience is guaranteed.
Plug and connection assignment DMX connections A five-pin XLR socket serves as DMX output, a five-pin XLR plug serves as DMX input. The drawing below and the table show the pin assignment of a matching coupling.
Troubleshooting 10 Troubleshooting NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. In the following we list a few common problems that may occur during operation.
Troubleshooting Symptom Remedy The unit does not work, no light, the display is dark Check the mains connection and the main fuse. Apparently no function despite proper power supply Check if the unit is in DMX mode or in ‘slave’ mode. If so, check the unit in another mode. No response to the DMX con‐ troller 1. Check whether the DMX controller is switched on. Check the DMX connectors and cables for proper con‐ nection. 2. Check the address settings and the DMX polarity. 3.
Cleaning 11 Cleaning Optical lenses Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the light output. The frequency of cleaning depends on the operating environment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device. n Clean with a soft cloth using our lamp and lens cleaner (item no. 280122). n Always dry the parts carefully.
Protecting the environment 12 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Notes LED spotlight 72
Notes Wild Wash Pro 648 LED RGB DMX, Wild Wash Pro 648 LED White DMX, Wild Wash Pro 648 WW DMX 73
Notes LED spotlight 74
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.