User's Manual

ASSEMBLY & OPERATIONAL INSTRUCTIONS

STEP 1:

STEP 2:

STEP 3:

NOTE:

Insert the STABILIZERS(2) into both ends of the MAIN FRAME(1) and secure

with BUTTON HEAD BOLTS(M8x1.25x12mm)(16) and ARC WASHERS(M8)(17).

DO NOT TIGHTEN COMPLETELY.

Adjust the STAND CAPS(3), set the inSTRIDE CYCLE XL on the floor and tighten

the bolts.

Bolt the T KNOB(14) into the hub on the MAIN FRAME(1).

Slide the TIMER(18) onto the plate on the MAIN FRAME(1).

There are two adjustment holes on each side of the PEDAL STRAPS(12). Select

the adjustment holes which allow your feet to be easily removed from the

PEDALS(11).

The surface of the crank housing may become

hot during use, so allow it to cool before

moving. Read the cautions posted on the

inSTRIDE CYCLE XL.

CAUTION:

Caution Decal

(both sides)