Owner's Manual Assembly Instructions Warranty Model Number 55-4050 STAMINA PRODUCTS MADE IN CHINA This Product is Produced Exclusively by 2757 S. Austin, Springfield, MO 65807 Customer Service Number 1 (800) 375-7520 www.staminaproducts.
ASSEMBLY INSTRUCTIONS Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part please call our toll-free number for assistance 1 (800) 375-7520 or e-mail us at: parts@staminaproducts.
PARTS LIST DIAGRAM# PART NAME QTY 1 2 3 4 5 6 7 Front Stand Middle Stand Rear Stand Connection Bar Endcap Pull Pin Manual 1 1 1 4 6 8 1 ASSEMBLY INSTRUCTIONS Connect the FRONT STAND(1) to the MIDDLE STAND(2) with two CONNECTION BARS(4) and lock in the place with the PULL PINS(6). Repeat to connect the REAR STAND(3) to the MIDDLE STAND(2). The PILATES RISER is designed to elevate the machine, Model No. 55-4280. Place your PILATES machine onto the riser as shown in the illustration.
THANK YOU FOR PURCHASING THE PILATES RISER Simply follow the few assembly instructions set forth in this manual. Within a few minutes you will be getting your body into shape and on your way to achieving a happier and healthier lifestyle. Although Stamina tries to manufacture its products with the finest materials and uses the highest standards of manufacturing, occasionally a part that does not fit, is the incorrect size, or is otherwise inappropriate is found.
FAX/MAIL ORDERING FORM Please do not return the product. For your convenience, Stamina has a Customer Service Department with a toll-free number. Should a part be missing or a defective part found, please call 1 (800) 375-7520 (in the U.S.) between 8:00 A.M. and 5:00 P.M. Central Time, Monday through Friday or fill out the fax sheet ordering form below and fax it to (417) 889-8064.