- Stamina Products, Inc Rowing Machine User Manual

ASSEMBLY INSTRUCTIONS

STEP 6

Slide the SEAT(66) onto the RAIL(2). Attach the STOPPER BUMPER(56) to the RAIL(2) with BUTTON

HEAD BOLTS(M8x1.25x25mm)(22). Also, please verify that the other STOPPER BUMPER(56) have already

been assembled at the factory. If it has not been pre-assembled, then please assemble at this time.

STEP 7

Attach the REAR STAND(3) to the RAIL(2) with a HEX BOLT(M8x1.25x15mm)(59) and a LOCK

WASHER(M8)(34) from inside the RAIL(2) and two FLAT HEAD BOLTS(M8x1.25x15mm)(57) from

underneath. Tighten all three bolts only after all three have been started. Press the RAIL CAP(53) into the

back end of the RAIL(2).

(Assembled at the factory)