- Stamina Products, Inc Stepper Machine User Manual

ASSEMBLY INSTRUCTIONS

STEP 4

For easier installation of the FOAM GRIPS(20), lubricate the HANDLEBAR(4) with a small amount of

liquid soap. Slide the

FOAM GRIPS(20) onto the HANDLEBAR(4).

STEP 5

Attach the MOUNTING BRACKET(21) onto the HANDLEBAR(4) with ROUND HEAD SCREWS

(M5 x 15mm)(33).

STEP 6

Install an "AA" battery into the METER(22), one battery included. See page 8 for detailed battery installation

instructions. Slide the

METER(22) onto the MOUNTING BRACKET(21). Make sure the SENSOR

WIRE(23) is located at the front of the HANDLEBAR(4), then plug the SENSOR WIRE(23) into the

METER(22).

Make sure the SENSOR WIRE(23)

is located at the front of the

HANDLEBAR(4).