- Stamina Products, Inc Stepper Machine User Manual

USING THE ELECTRONIC METER
8
Pedal movement or push any button.
Automatic shut off after 4 minutes of
inactivity.
POWER OFF :
POWER ON :
FUNCTIONS:
SCAN:
Automatically scans each function of TIME, CALORIE, STRIDES/MIN in sequence with
change every 6 seconds.
Upper readout displays the total number of strides you have taken, from zero to 9999
strides.
Displays the riding time, from 1 sec up to 99:59 minutes.
Displays the rate of strides per minute.
Displays the calorie consumption, from zero to 9999 cal.
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
COUNT :
STRIDES/MIN:
CALORIE:
TIME:
FUNCTION BUTTONS:
Push to select the function of the lower
readout.
To reset all functions to zero.
MODE :
RESET :
AA Battery
How to Install and Replace Battery:
1.
2.
Rechargeable batteries are not recommended.1.
Note:
Open the Battery Door on the back of the meter.
The meter operates with an AA battery. Refer to the illustration to
install or replace the battery.