- Stamina Products, Inc Stepper Machine User Manual

ADJUSTING RESISTANCE
The resistance of the shocks can be adjusted by sliding
the
SHOCK ADJUSTMENTS in the slot on the PEDAL
ARMS(5, 6). Position the SHOCK ADJUSTMENTS
at the front end of the slot to provide the lowest resistance
and the fastest workout pace. Position the
SHOCK
ADJUSTMENTS at the back end of the slot to provide
the highest resistance and the slowest workout pace.
CAUTION:
OPERATIONAL INSTRUCTIONS
Verify that the Shocks provide resistance.
Shocks on steppers get
HOT during use. To avoid burns, do not touch the shocks until they have time to
cool.
Verify that the Warning Label is in place and easy to read. Call Stamina Products immediately
(1-800-375-7520) for a replacement Warning Label if the Warning Label is missing or damaged.
It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts. Tighten
loose nuts and bolts.
Worn or damaged components shall be replaced immediately or the
Space Mate Folding Stepper
removed from service until repair is made.
Only Stamina Products supplied components shall be used to maintain/repair the
Space Mate Folding
Stepper.
Keep your Space Mate Folding Stepper clean by wiping with an absorbent cloth after use.
1.
2.
3.
3.
4.
5.
6.
7.
The safety and integrity designed into the
Space Mate Folding Stepper can only be maintained when
the
Space Mate Folding Stepper is regularly examined for damage and wear. Special attention should
be given to the following:
MAINTENANCE
SHOCK
ADJUSTMENT
9
The shocks get
HOT after a few minutes of use.
Tighten the
T KNOBS securely before using the Space
Mate Folding Stepper
1.
2.