Owner's Manual

ASSEMBLY INSTRUCTIONS
7
Place all parts from the box in a cleared area and position them on the oor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com to the Services section and order the part needed, e-mail
us at [e-mail], or call us toll free at 1-800-375-7520 (in the U.S.). Our
Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday
through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1: Unfold the FRONT FRAME(2) from the MAIN FRAME(1) and secure with the LOCKING
KNOB(20). Adjust the STAND CAPS(3) to set the inStride® Folding Cycle on the oor.
STEP 2: Screw the T KNOB(14) into the hub on the MAIN FRAME(1).
STEP 3: Slide the TIMER(22) onto the plate on the MAIN FRAME(1).
NOTE: The INNER and OUTER PEDAL STRAPS(12, 13) on both sides are connected together with
touch fastener. To adjust, separate the pedal straps and attach them together in different location
which allow your feet to be easily removed from the PEDALS(11).
CAUTION: The surface of the crank housing may become hot during use, so allow it to cool before
moving. Read the cautions posted on the inStride® Folding Cycle.
Caution Decal
(both sides)