Instructions / Assembly

OPERATIONAL INSTRUCTIONS

To increase the load, turn the HANDLEBAR TENSION KNOB(102)

clockwise.

To decrease the load, turn the HANDLEBAR TENSION KNOB(102)

counterclockwise.

HANDLEBAR LOAD ADJUSTMENT

To increase the load, turn the TENSION KNOB(32) clockwise.

To decrease the load, turn the TENSION KNOB(32) counterclockwise.

There are eight levels for the load adjustment.

PEDAL LOAD ADJUSTMENT

AAA Batteries

HOW TO INSTALL AND REPLACE BATTERIES:

1. Open the Battery Door on the back of the meter.

2. The meter operates with two AAA batteries, the batteries are not

included. Refer to the illustration to install or replace the batteries.

1. Do not mix a new battery with an old battery.

2. Use the same type of battery. Do not mix an alkaline battery with

another type of battery.

3. Rechargeable batteries are not recommended.

4. Ultimate disposal of battery should be handled according to

all state and federal laws and regulations.

5. Do not dispose of batteries in re.

NOTE: