Instructions / Assembly

1. To store the STAMINA
│ X AB/Hyper Bench, simply keep it in a clean dry place.
2. Use two people to lift from the FRONT and REAR STABILIZER(2, 1) to move the STAMINA │ X AB/
Hyper Bench.
3. Follow the process below to fold the STAMINA │ X AB/Hyper Bench as illustrated for easy storage.
The safety and integrity designed into the STAMINA
│ X AB/Hyper Bench can only be maintained when
the STAMINA │ X AB/Hyper Bench is regularly examined for damage and wear. Special attention should
be given to the following:
1. Verify that the CAUTION LABEL(41) is in place and easy to read. Call Stamina Products immediately
at 1-800-375-7520 for a replacement CAUTION LABEL(41) if it is missing or damaged.
2. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
3. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Securely tighten loose nuts and bolts.
4. Worn or damaged components shall be replaced immediately or the STAMINA
│ X AB/Hyper Bench
removed from service until repair is made.
5. Only Stamina Products supplied components shall be used to maintain/repair the STAMINA │ X AB/
Hyper Bench.
6. Keep your STAMINA
│ X AB/Hyper Bench clean by wiping it off with an absorbent cloth after use.
STORAGE
MAINTENANCE
13
a. Loosen but do not remove the SECURING KNOB(14).
Loosen and pull the ADJUSTMENT KNOB(13), slide
the KNEE CUSHION(12) to the lowest position. Then
lock in position by tightening the ADJUSTMENT
KNOB(13) and SECURING KNOB(14).
b. Refer to illustration A and B. Pull out the ADJUSTMENT
PIN(39) and lower the SEAT CUSHION(35) to the
lowest position. Lock the SEAT CUSHION(35) in
position with the ADJUSTMENT PIN(39).
c. Remove the LOCKING PIN(15) from the MAIN
SUPPORT(3) to fold the FRONT SUPPORT(4). Store
the LOCKING PIN(15) in the hole in the FRONT
SUPPORT(4). The STAMINA
│ X AB/Hyper Bench
should appear as shown in illustration C after folded.
B.
C.
A.
12