Instructions / Assembly

Part Number and Description Qty

18 Bolt, Hex Head (M10 x 1.5 x 70mm) 1

19 Bolt, Hex Head (M10 x 1.5 x 60mm) 2

25 Nylock Nut (M10 x 1.5) 6

23 Washer (M10) 18

24 Washer (M6) 8

20 Bolt, Hex Head (M10 x 1.5 x 20mm) 6

21 Bolt, Hex Head (M6 x 1 x 15mm) 4

length

mm.

in.

INCHES

This chart is provided to help identify the hardware used in the assembly process. Place the washers or

the ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to

check the length of the bolts and screws.

NOTICE: The length of all bolts and screws, except those with flat

heads, is measured from below the head to the end of the bolt

or screw. Flat head bolts and screws are measured from the

top of the head to the end of the bolt or screw.

After unpacking the unit, open the hardware bag and make sure that you have all the following items.

Some hardware may be already attached to the part.

MILLIMETERS

0 10 20 30 40 50 60 70 80 90

100

110

120

130 140

150

0 1/2

1 1/2

2 1/2

3 1/2

4 1/2

5 1/2

6 8

3/16"

1/4"

5/16" 3/8" 1/2"

HARDWARE IDENTIFICATION CHART

36 Bolt, Hex Head (M10 x 1.5 x 130mm) 2

37 Bolt, Hex Head (M10 x 1.5 x 120mm) 1

38 Bolt, Hex Head (M6 x 1 x 35mm) 4