Instructions / Assembly

ASSEMBLY INSTRUCTIONS
7
FRONT
REAR
Place all parts from the box in a cleared area and position them on the oor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Service section and order the part needed,
e-mail us at [e-mail], or call us toll free at 1-800-375-7520 (in the
U.S.). Our Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Insert the REAR STABILIZER(1) into the MAIN SUPPORT(3) and secure with HEX BOLTS(M10x1.5x20mm)
(20), and WASHERS(M10)(23). Press a NUT CAP(M10)(26) onto each bolt head of HEX BOLTS
(M10x1.5x20mm)(20).
STEP 2
Insert the FRONT STABILIZER(2) into the FRONT SUPPORT(4) and secure with HEX BOLTS(M10x1.5x20mm)
(20), and WASHERS(M10)(23). Press a NUT CAP(M10)(26) onto each bolt head of HEX BOLTS
(M10x1.5x20mm)(20).
STEP 3
Attach the FRONT SUPPORT(4) to the MAIN SUPPORT(3) with HEX BOLT(M10x1.5x70mm)(18),
WASHERS(M10)(23), and NYLOCK NUT(M10x1.5)(25). Press the NUT CAPS(M10)(26) onto the bolt head
of HEX BOLT(M10x1.5x70mm)(18) and NYLOCK NUT(M10x1.5)(25). Lock the FRONT SUPPORT(4) in
position by inserting the LOCKING PIN(ø8x60mm)(15) through the bracket on the MAIN SUPPORT(3)
and the FRONT SUPPORT(4).