Instructions / Assembly

ASSEMBLY INSTRUCTIONS
8
STEP 4: Attach the two CUSHION RAILS(9) to the FRONT SUPPORT(4) with HEX BOLT(M10x1.5x130mm)
(36), WASHERS(M10)(23), and NYLOCK NUT(M10x1.5)(25). Press the NUT CAPS(M10)(26) onto the
bolt head of HEX BOLT(M10x1.5x130mm)(36) and NYLOCK NUT(M10x1.5)(25).
NOTE: Tighten until snug, the CUSHION RAILS(9) must be allowed to pivot.
STEP 5: Refer to the Illustration. Slide the SEAT ADJUSTMENT(11) around FRONT SUPPORT(4) and
between the CUSHION RAILS(9). To attach the open end of the SEAT ADJUSTMENT(11) to the CUSHION
RAILS(9), insert the HEX BOLT(M10x1.5x130mm)(36) through the WASHERS(M10)(23), CUSHION
RAILS(9), SEAT ADJUSTMENT(11), SPACER(40), and tighten together with NYLOCK NUT(M10x1.5)(25).
Press the NUT CAPS(M10)(26) onto the bolt head of HEX BOLT(M10x1.5x130mm)(36) and NYLOCK
NUT(M10x1.5)(25).
STEP 6: Attach the SEAT CUSHION(35) to the CUSHION RAILS(9) with WASHERS(M6)(24) and HEX
BOLTS(M6x1x35mm)(38).
NOTE: The SEAT CUSHION(35) can be adjusted to different incline positions. To position the SEAT
CUSHION(35) to desired elevation, select one of the holes in the SEAT ADJUSTMENT(11) and
attach the SEAT ADJUSTMENT(11) to one of the holes in the FRONT SUPPORT(4) with the
ADJUSTMENT PIN(ΓΈ10x70mm)(39).