Instructions / Assembly

OPERATIONAL INSTRUCTIONS

USING THE FITNESS METER

1. Do not mix a new battery with an old battery.

2. Use the same type of battery. Do not mix an alkaline

battery with another type of battery.

3. Rechargeable batteries are not recommended.

4. Ultimate disposal of battery should be handled

according to all state and federal laws and regulations.

5. Do not dispose of batteries in re.

NOTE:

1. Open the Battery Door on the back of the meter.

2. The meter operates with two AA batteries, the batteries are not

included. Refer to the illustration to install or replace the batteries.

HOW TO INSTALL AND REPLACE BATTERIES:

FUNCTIONS:

Seat movement or press the button.

Automatically shuts off after four

minutes of inactivity.

POWER OFF :

POWER ON :

MODE/RESET BUTTON:

Press to select display functions, including SCAN, TIME,

TOTAL COUNT, COUNT, and CALORIES.

Press and hold for two seconds to reset all functions to

zero, except TOTAL COUNT.

NOTE:

AA Batteries

Automatically scans each function of TIME, TOTAL COUNT, COUNT, and CALORIES

in sequence with change every six seconds.

Displays the elapsed time from one second up to 99:59 minutes.

Displays the total accumulated number of rows you have taken, from zero to 9999

rows. The total accumulated rows is retained when the meter is turned off.

Displays the total number of rows you have taken from zero to 9999 rows.

Displays the calorie burned from zero to 9999 Kcal.

The calorie readout is an estimate for an average user. It should be used only as a

comparison between workouts on this unit.

SCAN:

TIME:

TOTAL COUNT

COUNT

CALORIES:

The TOTAL COUNT will be reset to zero after batteries are removed for battery

replacement or storage of the unit.