Instructions / Assembly

1. To store the

Stamina® Magnetic Rower

, simply keep it in a clean dry place.

2. Move the

Stamina® Magnetic Rower

with the moving wheels on the FRONT STABILIZER(3). Lift

the Rear Stabilizer on the RAIL FRAME(2) to move the

Stamina® Magnetic Rower

. Do not use

the SEAT(38) to move the

Stamina® Magnetic Rower

. The SEAT(38) will move and the SEAT

CARRIAGE(94) may pinch your hand or ngers.

3. To avoid damage to the meter, remove the batteries before storing the

Stamina® Magnetic Rower

for

one year or more.

4. Refer to the illustration below. You can stand the

Stamina® Magnetic Rower

on end for storage.

The safety and integrity designed into the

Stamina® Magnetic Rower

can only be maintained when the

Stamina® Magnetic Rower

is regularly examined for damage and wear. Special attention should be

given to the following:

MAINTENANCE

STORAGE

1. Pull on the HANDLEBAR(5) and verify that the Magnetic System provides tension and the seat travel

is smooth and stable.

2. Clean the roller tracks in the RAILS(30) with an absorbent cloth.

3. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.

Tighten loose nuts and bolts.

4. Check the condition of the STRAP(43). Replace the STRAP(43) if it is cracked or broken.

5. Verify that the CAUTION LABEL(31) is in place and easy to read. Call Stamina Products immediately

at 1-800-375-7520 for a replacement CAUTION LABEL(31) if it is missing or damaged.

6. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.

7. Worn or damaged components must be replaced immediately or the

Stamina® Magnetic Rower

removed from service until repair is made.

8. Only Stamina Products supplied components should be used to maintain/repair the

Stamina®

Magnetic Rower

9. Keep your Stamina® Magnetic Rower clean by wiping it o with an absorbent cloth after use.