Owner's Manual

Place all parts from the box in a cleared area and position them on the oor in front of you. Remove

all packing materials from your area and place them back into the box. Do not dispose of the

packing materials until assembly is completed. Read each step carefully before beginning. If you

are missing a part please call our toll-free number for assistance 1-800-375-7520 or e-mail us at

customerservice@staminaproducts.com.

ASSEMBLY INSTRUCTIONS

NOTE: There are some packing parts attached on the 1399 Air Rower. Please follow the steps below

to remove them before any assembly. These parts are only for packing, do not dispose of the

packing materials until assembly is completed.

STEP 1

Remove the CARDBOARD ROLLER from the front of the MAIN FRAME(1) by removing the SCREWS

and WASHERS.

STEP 2

A BUCKLE has been attached to the STRAP(24) to prevent the STRAP(24) from returning into the main

body of the 1399 Air Rower during shipping. Remove the BUCKLE by following these steps:

1. Refer to detail view 1. Pull the STRAP(24) away from the main body about 8 inches. Use one hand to

hold the STRAP(24) at position A while using the other hand to pull the STRAP(24) loop on the top of

the BUCKLE to the position as shown in detail view 2.

2. Refer to detail view 2. Continue to hold the STRAP(24) at position A. Pull the STRAP(24) from

position B until the STRAP(24) is completely removed from the BUCKLE. Make sure the STRAP(24)

isn't twisted and let it return into the main body of the 1399 Air Rower. The STRAP(24) will hold the

HANDLEBAR(16) taut against the MAIN FRAME(1).

1. 2.

Cardboard Roller

Buckle

Screws

Washers