Instructions / Assembly

ASSEMBLY INSTRUCTIONS

STEP 8

Connect the LOWER SENSOR WIRE(90) to the CONNECTION WIRE(85). Attach the RAIL(8) to the MAIN

FRAME(1) with BUTTON HEAD BOLTS(M8x1.25x25mm)(51) and WASHER(M8)(35). Lock the RAIL(8)

in position by inserting the PULL PIN(54) into the MAIN FRAME(1). Slide the WASHER(ø13xø28x2mm

thick)(55) onto the LOCKING KNOB(53), then screw the LOCKING KNOB(53) into the RAIL(8) for more

security.

STEP 9

Install two AA batteries into the METER(67), the batteries are not included. See page 12 for detailed

battery installation instructions. Connect the SENSOR WIRE(68) and the CONNECTION WIRE(85) to the

METER(67). Press the METER(67) into the opening in the COVERS(10, 95).