Owner's Manual

ASSEMBLY INSTRUCTIONS
7
STEP 1
Attach the LEFT and RIGHT UPRIGHTS(2, 3) to the BASE FRAME(1) with HEX BOLTS(M10x1.5x50mm)
(33) and WASHERS(M10)(43). DO NOT TIGHTEN COMPLETELY.
STEP 2
Connect the LOWER EXTENSION WIRE(24) located on the LEFT UPRIGHT(2) to the SENSOR WIRE(25).
Place all parts from the box in a cleared area and position them on the oor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Service section and order the part needed,
e-mail us at [e-mail], or call us toll free at 1-800-375-7520 (in the
U.S.). Our Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.