Owners Manual

ASSEMBLY INSTRUCTIONS
STEP 1:
Refer to the illustrations below. Rotate the LEFT and RIGHT UPRIGHT(2, 3) to the upright
position. Install the TENSION KNOB(25) into the opening in the RIGHT UPRIGHT(3) and secure with
ROUND HEAD SCREW(M5x0.8x30mm)(40).
STEP 2:
Insert the BASE FRAME(4) into the LEFT and RIGHT UPRIGHT(2, 3) and secure with
BUTTON HEAD BOLTS(M8x1.25x40)(37), ARC WASHERS(M8)(51), and NYLOCK NUTS(M8x1.25)
(53).
STEP 3:
Refer to detail view A. Lock the MAIN FRAME(1) in the unfolded position by inserting
the LOCKING KNOB(33) through the hole in the SUPPORT BAR(8) and screwing it into the MAIN
FRAME(1).
7
A.
Place all parts from the box in a cleared area and position them on the oor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at [e-mail], or call us toll free at 1-800-375-7520
(in the U.S.). Our Customer Care Sta󰀨 is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
Some product parts are t tested at the factory to ensure proper t and alignment. Marks in
the paint may be noticeable, but are not an indication of damage.