Operation Manual

GX1250SA Owner’s Manual page 19
6 MAINTENANCE
The inherent quality of the solid-state components used in this transceiver
will provide many years of continuous use. Taking the following
precautions will prevent damage to the transceiver.
* Never key the microphone unless an antenna or suitable dummy load is
connected to the transceiver.
* Ensure that the supply voltage to the transceiver does not exceed 16
VDC or fall below 11 VDC.
In the unlikely event of serious problems, please contact your STANDARD
HORIZON Dealer or our repair facility. Address and phone numbers for this
facility, as well as warranty information, are contained in your Owner’s
Manual Supplement.
6.1 REPLACEMENT PARTS
Occasionally an owner needs a replacement mounting bracket or knob.
These can be ordered from our Parts Department by writing or calling:
STANDARD HORIZON, a division of VERTEX STANDARD.
17210 Edwards Rd., Cerritos, CA 90703, U.S.A.
[phone]
Commonly requested parts, and their part numbers are listed below.
Microphone, White (CMP349WR) .............................. MP51000460
Microphone, Black (CMP349BR) ............................... MP51000470
Mounting Bracket, White ............................................ 457X160010
Mounting Bracket, Black ............................................ 457X160110
Mounting Bracket Knob, White .................................. 444X154030
Mounting Bracket Knob, Black ................................... 444X154130
Volume Control Knob ................................................. 444X154500
Squelch Control Knob ................................................ 444X154500
Power Cord ................................................................ ZC01300010
Mic Hanger, White...................................................... 277X155020
Mic Hanger, Black ...................................................... 277X155120