User Manual

GX1300
Page 44
7. After the all ships call is transmitted, the trans-
ceiver will switch to the channel which select-
ed on the step 5 above, with no change of the
display. To change the display, press the
QUIT
soft key.
ALL SHIPS
CATEG: SAFETY
SINCE: 00:05
[ Transmitted ]
QUIT
8. Listen to the channel to make sure it is not busy, then key the micro-
phone and say “PAN PAN, PAN PAN, PAN PAN” or “Securite, Securite,
Securite” depending on the priority of the call. Say your call sign and
announce the channel you wish to switch to for communications.
9.4.2 Receiving an All Ships Call
1. When an all ships call is received, an emergency alarm sounds.
The display will show the MMSI (or name) of the vessel transmitting the
all ships call.
2. Press any key on the radio to stop the alarm.
3. To immediately switch to requested channel,
press the
ACCEPT
soft key.
If a key is not pressed for thirty seconds (by
default; refer to the section “10.3.8 Auto
Channel Switching Time”) after an all ships
call is received, the GX1300 will automatically
switch to the requested channel for you to
monitor communications.
RX ALL SHIPS
YAESU
CATEG: SAFETY
CH: 08
SINCE: 00:05
ACCEPT QUITPAUSE
BUSY
MEM
A
C
USA
25W
08
ALL SHIPS PAUSE
QUITRESUME
4. Press the
PAUSE
soft key to suspend the
acknowledgement.
Press the
RESUME
soft key to resume the
acknowledgement.
5. If you want the radio to stay on the channel you were on before receiv-
ing the all ships call, press the
QUIT
soft key.
6. Press the ▲ / ▼ keys to scroll the screen and
see the MMSI (or name) of the calling vessel,
category of the call and requested operating
channel.
RX ALL SHIPS
YAESU
CATEG: SAFETY
CH: 08
SINCE: 00:08
ABLE QUITUNABLE
7. Press the
QUIT
soft key to display the operat-
ing channel number of the requested channel.
8. Press the PTT switch on the microphone and talk to the calling vessel.