User Manual

Page 27GX1600
8.4 SIMPLEX/DUPLEX CHANNEL USE
Refer to section “16 CHANNEL ASSIGNMENTS” for instructions on use of
simplex and duplex channels.
NOTE
All channels are factory-programmed in accordance with FCC (USA),
Industry Canada (Canada), and International regulations. Mode of op-
eration cannot be altered from simplex to duplex or vice-versa.
8.5 DISPLAY TYPE
The GX1600 display can be setup to show displays other than the default
“NORMAL” VHF display by using the procedure below:
“NORMAL” DISPLAY “COMPASS” DISPLAY
1. Press and hold down the key until “Setup Menu”
appears, then select “GENERAL SETUP” with the
/ key.
2. Press the soft key, then press the /
key to select “DISPLAY”.
3. Press the soft key.
4. Press the / key to select desired screen
“NORMAL”, “COMPASS”, or “WAYPOINT”.
5. Press the soft key to store the selected set-
ting.
6. Press the soft key several times to return to
radio operation.
“WAYPOINT” DISPLAY