User Manual

GX1600Page 30
8.9 SCANNING
Allows the user to select the scan type from Memory scan or Priority scan.
“Memory scan” scans the channels that were programmed into memory. “Pri-
ority scan” scans the channels programmed in memory with the priority chan-
nel.
8.9.1 Scan Type Selection
1. Press and hold down key until “Setup
Menu” appears.
2. Press the / key to select “CH FUNC-
TION SETUP”.
3. Press the soft key, then press the
/ key to select “SCAN TYPE”.
4. Press the soft key.
5. Press the / key to select “PRIORITY
SCAN” or “MEMORY SCAN”.
6. Press the soft key to store the selected set-
ting.
7. Press the soft key several times to return to radio operation.
8.9.2 Scan Memory Programming
1. Press and hold down the key until “Setup Menu”
appears.
2. Press the / key to select “CH FUNCTION
SETUP”.
3. Press the soft key, then press the /
key to select “SCAN MEMORY”.
4. Press the soft key.
5. Press the / key to select a desired chan-
nel to be scanned, the press the soft key.
“MEM” icon appears on the display, which indicates
the channel has been selected to the scan channel.
6. Repeat step 5 for all the desired channels to be
scanned.
7. To DELETE a channel from the list, select the chan-
nel then press the soft key. “MEM” icon dis-
appears from the display.
8. When you have completed your selection, press the soft key sev-
eral times to return to radio operation.