User Manual

ManualsBrandsStandard Horizon ManualsCar & Vehicle ElectronicsStandard Horizon GX1600B Standard Explorer VHF Marine Radio - Black

Page 31GX1600

8.9.3 Memory Scanning

(

M-SCAN

)

1. Adjust the SQL knob until background noise disappears.

2. Press the one of the Soft keys momentarily, then press the soft

key. “M-SCAN” appears on the display. Scanning will proceed from the

lowest to the highest programmed channel number

and Preset channel (described in the next chapter)

and will stop on a channel when a transmission is

received.

3. The channel number will blink during reception.

4. To stop scanning, press the key.

8.9.4 Priority Scanning

(

P-SCAN

)

By default, Channel 16 is set as the priority channel. You may change the

priority channel to the desired channel from Channel 16 by the Radio Setup

Mode, refer to section “11.5 PRIORITY CHANNEL”.

1. Adjust the SQL knob until background noise disappears.

2. Press the one of the Soft keys momentarily, then

press the key. “P-SCAN” appears on the dis-

play. Scanning will proceed between the memorized

channels and Preset channel (described in next

chapter) and the priority channel. The priority channel will be scanned af-

ter each programmed channel.

3. To stop scanning, press the key.

CH12

CH09

CH01A

CH15

CH18

CH22A

CH61A

CH68A

CH88A

MEMORY SCAN

(