User Manual

GX1600Page 32
8.10 PRESET CHANNELS
(
0 ~ 9
)
: INSTANT ACCESS
10 Preset Channels can be programmed for instant access. Pressing the
key activates the preset channel bank. If the key is pressed and no chan-
nels have been assigned, an alert beep will be emitted from the speaker.
8.10.1 Preset Channel Programming
1. Press the / key to select the channel to be
programmed.
2. Press and hold the key until the channel num-
ber is blinking.
3. Press the / key to select the desired Pre-
set channel position (“SET 0” - “SET 9”) you wish to
program.
4. Press the soft key momentarily to program
the channel into the Preset channel.
5. Repeat steps 1 through 4 to program the desired
channels into Preset Channels “0” ~ “9”.
8.10.2 Operation
1. Press the key to recall the Preset Channel.
The “P SET” icon will appear on the display.
2. Press the / key to select the desired Pre-
set Channel (“0” ~ “9”). The Preset Channel num-
ber appears (“P-SET0” - “P-SET9”) while selecting the
Preset Channel.
3. Press the key key again to return to the last
selected channel. The “P SET” icon will disappear
from the display.
8.10.3 Deleting a Preset Channel
1. Press the key.
2. Press the / key to select the Preset Chan-
nel to be deleted.
3. Press and hold the key until the channel num-
ber is blinking.
4. Press the soft key momentarily to delete the
channel from the Preset Channel.
5. Repeat steps 2 through 4 to delete the desired chan-
nels from Preset Channels “0” ~ “9”.
6. To finish the deleting the Preset Channel, press the soft key