User Manual

Page 35GX1600
How can I obtain an MMSI assignment?
In the USA, visit the following websites to register:
http://www.boatus.com/mmsi/ or
http://seatow.com/boating_safety/mmsi.asp
In the Canada, visit
http://www.ic.gc.ca/epic/site/smt-gst.nsf/en/sf01032e.html or
http://www.usps.org/php/mmsi/rules.php
9.2.2 Programming the MMSI
WARNING
A user MMSI can be inputted only once. Therefore please be careful
not to input the incorrect MMSI number. If you need to change the
MMSI number after it has been entered, the radio will have to be returned
to Factory Service. Refer to the section “15.2 FACTORY SERVICE.”
1. Press and hold down the key until the
“Setup Menu” appears.
2. Press the / key to select “MMSI
SETUP”.
3. Press the soft key. (To cancel, press the
soft key.)
4. Press the / key to select the first
number of your MMSI, then press the
soft key to step to the next number.
5. Repeat step 4 to set your MMSI number (nine
digits).
6. If a mistake was made entering in the MMSI
number, press the soft key until the
wrong number is selected, then press the /
key to correct the entry and press the soft
key.
7. When finished programming the MMSI number,
press and hold the soft key. The radio will
ask you to input the MMSI number again. Use steps 4 - 6 above.
8. After the second number has been input, press and hold the soft to
store the MMSI.
9. Press the soft key to return to radio operation.
NOTE
To view your MMSI after programming to ensure it is correct, perform
steps 1~3. Look that the MMSI number shown on the display is correct.