User Manual

GX1600Page 44
10. Press the / key to scroll through numbers,
0-9. To enter the desired number and move one
space to the right by pressing the soft key.
Repeat this procedure until all nine space of the
MMSI number are entered.
11. If a mistake was made entering in the MMSI number repeat pressing the
soft key until the wrong number is selected, then press the /
key to correct the entry.
12. To store the data entered, press and hold the soft key.
13. To enter another individual address, repeat steps 5 through 12.
14. Press the soft key several times to return to radio operation.
9.5.2 Individual Reply Setup
This menu item sets up the radio to automatically (default setting) or manually
respond to a DSC Individual call requesting you to switch to a working channel
for voice communications. When Manual is selected the MMSI of the calling
vessel is shown allowing you to see who is calling. This function is similar to
caller id on a cellular phone.
1. Press and hold down the key until “Setup
Menu” appears.
2. Press the / key to select “DSC
SETUP” menu.
3. Press the soft key, then select “INDI-
VIDUAL REPLY” with the / key.
4. Press the soft key.
5. Press the / key to select “AUTO-
MATIC” or “MANUAL”.
6. Press the soft key to store the selected set-
ting.
7. Press the soft key several times to return to radio operation.
9.5.3 Individual Acknowledgment Setup
The GX1600 can select either reply message “Able” (default) or “Unable” when
the Individual Reply setting (described previous section) is set to “AUTOMATIC”.
When the Individual Reply setting (described previous section) is set to “AU-
TOMATIC”, the GX1600 can be setup to reply “Able” (default) or not reply
“Unable” to an received Individual Call. When “Unable” is selected the GX1600
will transmit a “Unable” reply to the calling station to inform them you are away
from your radio.