User Manual

Page 73GX1600
10.7 UNIT OF MEASURE
Allows Navigation and AIS displays to be shown in “Knot”, “Mile/Hour” or “Kilo-
Meter/Hour” (for speed) and “Nautical Mile” or “Kilo-Meter” (for distance).
NOTE
A GPS must be connected to the radio to be able to show SPEED and
DISTANCE.
1. Press and hold down the key until “Setup Menu”
appears, then select “GENERAL SETUP” with the
/ key.
2. Press the soft key, then press the /
key to select “UNIT OF MEASURE”.
3. Press the soft key.
4. Press the / key to select “SPEED” or “DIS-
TANCE” which you wish to change.
5. Press the soft key, then press the /
key to select desired unit. Available selections are
KTS (knot), MPH (Mile/Hour), or KMH (Kilo-Meter/
Hour) for speed, and NM (Nautical Mile), SM (Stat-
ute Mile), or KM (Kilo-Meter) for distance.
6. Press the soft key to store the selected set-
ting.
7. Press the soft key several times to return to
radio operation.