User Manual

Page 75GX1600
10.10 STATION NAME
This function allows you to change the name of the radio or RAM3 second
station microphone. Example: “Radio - Cabin”, “RAM1 - Flybridge”.
1. Connect the RAM3 second station microphone to the GX1600.
2. Press and hold down the key until “Setup Menu”
appears, then select “GENERAL SETUP” with the
/ key.
3. Press the soft key, then press the /
key to select “STATION NAME”.
4. Press the soft key.
5. Press the / key to select the Unit (“Radio”
or “RAM1”) to be named, then press the soft
key.
6. Press the / key to scroll through the first
letter of the new channel name.
7. Press the soft key to store the first letter in
the name and step to the next letter to the right.
8. Repeat step 6 and 7 until the name is complete.
The name can consist of up to 8 characters, if you
do not use all 8 characters press the soft
key to move to the next space. This method can also be used to enter a
blank space in the name. If a mistake was made entering in the name
repeat pressing the key until the wrong character is selected, then
press the / key to correct the entry.
9. Press and hold the soft key to enter the name.
10. If you want to enter the name of the connected RAM3 or Radio, repeat
steps 5 through 9.
11. Press the soft key several times to return to radio operation.